The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.
ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.
Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
The PriceActionSwing indicator for NinjaTrader 7.0 calculates swings in different ways and visualize them. It shows swing information like the swing length, duration, volume,... It contains a lot of features. It is also useable on the Market Analyzer.
The package contains 3 indicators: PriceActionSwing
- standard swing indicator with visualization and swing information PriceActionSwingPro
- Draw automatically Fibonacci extensions and retracements
- Calculate a swing statistic
- Calculate and visualize ABC patterns
- Risk management (automatically for ABC patterns)
- Calculate and visualize divergence based on an indicator
- GomCD (uncomment the "region GomCD" parts in the source code) PriceActionSwingOscillator
- swing trend visualization
- developing swing volume (repainting)
Useful to see/trade price action with HH, HL in uptrends and LL, LH in downtrends and patterns like double top/bottom, triangle,…
Version 17 - June 5 2014
- Changed the code structure for simpler access from strategies and other indicators If you use PriceActionSwing within other files, make sure you have a backup from the old version
- Added swing tick and swing percentage calculation
- Added swing calculation based on close values
- Added seperate swing price output
- Added developing GomCD output since the last swing
- Improved risk management items
- Added risk management tab
- Added different alerts
Version 18 - June 15 2014
- Fixed minimum swing size to < 1 for percentage settings
Starting from version 17 NinjaTrader 6.5 will not longer be supported. Starting from version 19 NinjaTrader 7.0 will not longer be supported get NT8 version here
COMPATIBILITY:
NinjaTrader 6.5: NO
NinjaTrader 7.0: YES
NinjaTrader 8.0: NO, see NT8 version here
December 12th, 2016
Size: 59.19 KB
Downloaded: 37178 times
57
dorschden
Exported using NT Version 7.0.1000.26
Indicator will only run on NT 7.0.1000.5 or later
The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.
Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.
Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.
ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
RTH multi: The TWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.
Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15,2011: TWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of TWAP bands added.
Update July 26, 2011: SessionTWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update July 4, 2012: Serialization of plot parameters changed.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Changelog:
(earlier changes can be found in post #1 in the thread)
April 16 2013: v5.8
Important Bug Fix: fixed rounding error that pretty much messed up everything, please ALL update to this version!
v5.9
Apparently v5.8 did not fix the issue, hence this update.
May 5 2013: v6.0
Fixed a bug that could result in large trace files.
June 10 2013: v6.1
Improved window position handling. Now has 5 modes:
Auto: Default location and size
Manual: location and size are set manually
DockRight: Docks to the right of the parent chart
DockLeft: Docks to the left of the parent chart
RememberPosition: this will remember position and size
Feb 07 2014: v6.2
Added option to show the Dominant Limit or Largest Limit in a print, setting for this is: Parameters-->#12
v6.3 Fixde a bug in the RememberPosition function.
March 9th, 2023 05:21 PM MONICAP hello, and thanks for your time developing and sharing this indicator. i want to ask if this could be available for NT8
also. thank you
September 16th, 2022 07:30 PM TomTownsend Very helpful, thank you, and for all you do!!!
February 19th, 2019 06:43 AM Anand Jagdeo good morning. I am fairly new to trading and would like to use this indicator. am i supposed to change the dates for the
se holidays to the current year. Please advise. Seems like a pretty good indicator if applied properly. Thanks
Anand
June 9th, 2017 11:10 AM mercyj does anyone know why I can't set the autoscale to FALSE? it's greyed out. and the pivots are all wacko on the chart
March 17th, 2019 10:53 PM Aragorn Excellent for possibly helping us who never learned how to read the tape. Awesome. Thank-you
November 7th, 2018 07:03 AM romus Excellent!
December 2nd, 2016 09:10 AM gentech Many, many thanks for this work. Will there be a version for the NT8 platform? (I wish I had the skills of some of the c
ontributors here; I'd love to do some conversions myself and post for others to use.) Once again, thank you for sharing
your hard work with us.
February 25th, 2016 04:49 PM elyt Thanks, this is so useful. All the best
December 25th, 2015 09:24 AM lesterb Excellent, thank you !