Options for the Pivot indicators: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the prior session
Options for the OHL indicators: Open, high and low of the current period, Fibonacci retracement levels calculated from current high and low, noise bands, target bands based on the average daily/weekly/monthly range.
Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are adapted to dark chart backgrounds.
Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template only ETH pivots, ETH OHL and ETH noise and target bands can be displayed. For displaying RTH pivots, it is recommend to use a multi-session template that divides the day into the night session, regular session and after-session.
Use of daily data on intraday charts: The 3 pivot indicators are designed to load daily data, if the option for "Calculate from session" is set to “Daily Bars”. This the data used by the indicator:
"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.
Auto setting for the 3 pivot indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.
VWAP: The VWAP of the prior day is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.
Auto setting for the 3 OHL indicators: The Auto setting will preselect the third intraday-session as the regular session for FOREX & currency futures, but preselect the second intraday-session for all other instruments.
Noise Bands: The OHL indicators can be used to display noise bands. The noise is determined by averaging the smaller move Min (High – Open, Open – Low) over N1 & N2 days. The average values are displayed in a data table. The noise is added to and subtracted from the current open.
Target Bands: The OHL indicators can be used to display target bands. The targets can be determined in two different ways: Either the average daily range over N1 & N2 days is added to the current low (high projection) or subtracted from the current high (low projection), or the daily expansion from the open Max(High – Open, Open – Low) is averaged over N1 & N2 days and added to and subtracted from the open. The average daily range or average daily expansion is shown in the data table.
GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.
Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update May 24, 2011: Due to a bug, the new signature for GetNextBeginEnd() is only implemented for OnBarUpdate() but not for Plot() Override.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 11, 2011: Indicator reshaped, small bug removed that affected weekly ETH pivots after a holiday that fell on a Monday.
Update July 20, 2011: Serialization of the plots changed.
Update December 12, 2011: Levels R5, S5 added. Some labels changed. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update January 6, 2012: Holiday fields added for anaCurrentDayOHLV38
Update June 20, 2012: Shading added for Pivot Range and Jackson Zones
Update February 16, 2013: Indicators entirely redesigned. Holiday calendar added for 2013. The former SessionNoiseBands & Session Volatility Bands have now been integrated into the CurrentOHL indicators.
Update March 11, 2013: No added features, but 2 bugs removed that had affected the plots with specific settings.
Update March 13, 2013: Bug removed, RTH pivots did not work, when data table was unselected.
Update April 10, 2013: Plot modified for compatibility with charts built from multiple bar series
Update May 10, 2013: Regular close can now be displayed for the remaining hours of the trading day. Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update January 22, 2013: CurrentDayOHLV42 did not display pivots for prior days when set to RTH. Bug removed.
Update September 17, 2014: With indicator setting "RTH" current day's range is now displayed as 0 during the night session.
Update September 20, 2014: Minor update, data table for ADR/ADN now plots on top of the indicator plots. Indicator plots can now be accessed via SHIFT + mouse wheel to change the Z-Order of the indicator.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Update February 11, 2015: Minor update. Formatting of ATR/Noise improved for currency pairs with quote currency JPY.
Detailed explanations how to use the indicator can be found here:
Changelog:
(earlier changes can be found in post #1 in the thread)
April 16 2013: v5.8
Important Bug Fix: fixed rounding error that pretty much messed up everything, please ALL update to this version!
v5.9
Apparently v5.8 did not fix the issue, hence this update.
May 5 2013: v6.0
Fixed a bug that could result in large trace files.
June 10 2013: v6.1
Improved window position handling. Now has 5 modes:
Auto: Default location and size
Manual: location and size are set manually
DockRight: Docks to the right of the parent chart
DockLeft: Docks to the left of the parent chart
RememberPosition: this will remember position and size
Feb 07 2014: v6.2
Added option to show the Dominant Limit or Largest Limit in a print, setting for this is: Parameters-->#12
v6.3 Fixde a bug in the RememberPosition function.
February 7th, 2014
Size: 29.17 KB
Downloaded: 7925 times
1246
vvhg
Enhancements to GOM MP :
1. Added new SPLIT session mode, that will show AH and RTH profiles together in one chart. Works with other types as well.
2. Added Display profile levels such as Trading Session High, Trading Session Low, Mid, VPOC, Value Area High and Value Area Low
3. Added IB minutes parameter to allow you to set initial balance of your preference. IB parameter is turned off for AH session. IB won’t show if you have bar set to more than IB minutes.
4. Enhanced Developing VPOC function. Displays now straight progressing line for clear visibility.
5. Added Naked Vpoc levels with an option to display closed naked vpocs
6. Added Naked Close (GAP) levels with an option to display closed GAPS
7. Added option to display the naked level date and price level to the right panel
8. Added Summary section below the Profile that displays total profile volume with an option to format kilo, million and no formatting.
9. Added Summary section below the Profile that also display Initial Balance range and Daily range.
10. Added option to compute profiles for all bars on the chart vs on screen bars. This is important for naked levels in the past computation and display on screen without a need to squeeze the chart to naked level day.
Updated 05/21 :
Fixed IB settings for 24/7 & RTH Template;
[IB] summary level display adjustment dynamically to the top of the range.
Updated 05/22 :
Upgraded to GOMi's 4.6 version- Thanks to TimeTrade@BMT
Added a separate Pen style for dVPOC.
Updated 05/23 :
Fixed issue with the price display for currency and Bond markets
Updated 05/25 :
Added option to turn the status message off <8.13>
For this to work, additionally download and compile Hot Key Manager file from here GomHotKeyManager
Updated 05/26 :
Fixed Serialization problem for Fonts
Updated 05/27 :
Added toolbar buttons to set profile attributes.
Added option to show IB for overnight session
Added option to set color for summary text
Added option to set color for naked level text
Added option to show Continuous VA/VPOC/VWAP
Updated 05/28 :
Fixed the screen flicker issue
Updated 08/21 :
Attempt to fix performance problem reported during the RTH session start
March 9th, 2023 05:21 PM MONICAP hello, and thanks for your time developing and sharing this indicator. i want to ask if this could be available for NT8
also. thank you
September 16th, 2022 07:30 PM TomTownsend Very helpful, thank you, and for all you do!!!
February 19th, 2019 06:43 AM Anand Jagdeo good morning. I am fairly new to trading and would like to use this indicator. am i supposed to change the dates for the
se holidays to the current year. Please advise. Seems like a pretty good indicator if applied properly. Thanks
Anand
June 9th, 2017 11:10 AM mercyj does anyone know why I can't set the autoscale to FALSE? it's greyed out. and the pivots are all wacko on the chart
February 25th, 2017 12:27 PM essiar Not sure what I am doing wrong here, I have imported .cs files previously. I am trying to install ALTOGomMP.cs. I alread
y have GomCD, GomCDSMA_UpDown, GomDeltaVol_UpDown and GomRecorderIndicator in my list of indicators. I keep getting erro
r msg CS0246 which states there is a dll file missing. So when I try to install GomMP2.1 I get an error msg stating I ha
ve custom ninjascript files on my pc that have programming errors. So I delete ALTOgom.cs from the bin. I go to import G
omMP2.1 again and I get another error msg saying Archive may contain duplicate method names that already exist or there
is a required file missing. I have been using Ninja for 10 years now and have never run into this issue. Suggestions?
October 13th, 2016 03:28 PM CoCo
August 7th, 2016 07:37 AM dalebru Outstanding, thanks to both you and gomi.
March 17th, 2019 10:53 PM Aragorn Excellent for possibly helping us who never learned how to read the tape. Awesome. Thank-you
November 7th, 2018 07:03 AM romus Excellent!
December 2nd, 2016 09:10 AM gentech Many, many thanks for this work. Will there be a version for the NT8 platform? (I wish I had the skills of some of the c
ontributors here; I'd love to do some conversions myself and post for others to use.) Once again, thank you for sharing
your hard work with us.
February 25th, 2016 04:49 PM elyt Thanks, this is so useful. All the best
December 25th, 2015 09:24 AM lesterb Excellent, thank you !