NexusFi: Find Your Edge

Home Menu


Categories Help    

Search Results
Entries suggested by "NT 6.5 installer needed!"

Trend Follower 4 *
It uses a DM +/- and a MACD Crossover strategy. It works good on the ES_F 15min with 15 tick stop loss. Play around, have fun. Let me know what you think. It also gets you out of trades on exit positions if the conditions no longer warrent

Category NinjaTrader 7 Strategies 
Suggest other entries I might like
Details: Trend Follower
Category: NinjaTrader 7 Strategies 

April 28th, 2013
Size: 5.47 KB
Downloaded: 1727 times

Keywords: dmi macd
PriceActionSwing NT7 5 *
The PriceActionSwing indicator for NinjaTrader 7.0 calculates swings in different ways and visualize them. It shows swing information like the swing length, duration, volume,... It contains a lot of features. It is also useable on the Market Analyzer.

The package contains 3 indicators:
- standard swing indicator with visualization and swing information
- Draw automatically Fibonacci extensions and retracements
- Calculate a swing statistic
- Calculate and visualize ABC patterns
- Risk management (automatically for ABC patterns)
- Calculate and visualize divergence based on an indicator
- GomCD (uncomment the "region GomCD" parts in the source code)
- swing trend visualization
- developing swing volume (repainting)

Useful to see/trade price action with HH, HL in uptrends and LL, LH in downtrends and patterns like double top/bottom, triangle,…

For more information see this thread.

Version 17 - June 5 2014
- Changed the code structure for simpler access from strategies and other indicators
If you use PriceActionSwing within other files, make sure you have a backup from the old version
- Added swing tick and swing percentage calculation
- Added swing calculation based on close values
- Added seperate swing price output
- Added developing GomCD output since the last swing
- Improved risk management items
- Added risk management tab
- Added different alerts

Version 18 - June 15 2014
- Fixed minimum swing size to < 1 for percentage settings

Version 19 - December 12 2016
- Updated to NinjaTrader 8, get NT8 version here

Starting from version 17 NinjaTrader 6.5 will not longer be supported.
Starting from version 19 NinjaTrader 7.0 will not longer be supported get NT8 version here

NinjaTrader 6.5: NO
NinjaTrader 7.0: YES
NinjaTrader 8.0: NO, see NT8 version here

Category Free Section 
Suggest other entries I might like
Details: PriceActionSwing NT7
Category: Free Section 

December 12th, 2016
Size: 59.19 KB
Downloaded: 37152 times
VolumeLadderMetroEdition 4 *
Its enhanced version of Volume Ladder with new features.
For more detail see following post.

Update: 17-May-2013

Its now VolumeLadderMetroEditionV1Extn1 with new features over V1.
New Center Ladder Type and New Cell Color Schemes introduced.

For more detail see

Category NinjaTrader 7 Indicators 
Suggest other entries I might like
Details: VolumeLadderMetroEdition
Category: NinjaTrader 7 Indicators 

May 17th, 2013
Size: 148.37 KB
Downloaded: 5309 times
Visual SMA Multi-Timeframe 5 *
Exported using NT Version 7.0.1000.11

Indicator will only run on NT 7.0.1000.4 or later.

The VisualSMA is a MTF (multi-timeframe) version of the Simple Moving Average. It will plot on any chart and allows to calculate the moving average

- from minute bars
- from second bars
- from tick bars
- from range bars
- from volume bars

For example you can display an hourly SMA on a 235 tick chart, or display a 11-period SMA calculated from a 500 tick chart on a 7 range chart.

The indicator has three modes to display the moving average:

StrategicMode: The first bar series collects the values from the secondary series without any lag on historical data, but a 1-tick lag on real-time data. This mode does not repaint, but shows the values originally recovered from the secondary bar series. On the chart the indicator in Strategy Mode is plotted yellow.

FirstTickMode: To avoid the lag for similar bars with identical time stamps, the indicator repaints the indicator value for the prior bar, after the first tick of the current bar has been registered. The one-tick repainting reduces the lag. On the chart the FirstTick Mode is shown in red.

Visual Mode: To make it easier to use the indicator visually, the indicator interpolates the distance between two consecutive bars of the secondary bar series. The interpolation algorithm works in real-time and simulates the CalculateOnBarClose = false mode for the indicator relative to the secondary bar series. It repaints the current leg of the indicator back to the prior bar of the secondary series. The interpolation adapts itself to equidistant or non-equidistant charts. The Visual Mode is shown in aqua.

This indicator comes as a protected assembly, so you cannot directly access the code.

Update August 30, 2011: 1-Tick Repainting for VisualMode and FirstTickMode was only enabled for fixed period bars. It is now also available for other bar types.
Update September 6, 2011: Bug fixed. VisualMode interpolation could be a few ticks off on real-time data.
Update November 9, 2011: Indicator entirely recoded, robustness and speed improved, lag reduced.
Update November 23, 2011: Indicator was lagging with CalculateOnBarClose = true setting. Lag is eliminated.
Update January 5, 2012: Option added to select color according to the slope of the VisualSMA. Paintbars added as a trendfilter.
Update August 15, 2012: Code updated to allow for displacement of indicator.
Update September 29, 2012: Renko option removed. Indicator could not always be called from a strategy, bug removed.

Please remove prior versions of the indicator, before installing the new release:
(1) Remove old assembly via File -> Utilities -> Remove NinjaScript Assembly.
(2) Shut down NinjaTrader and restart it.
(3) Install new file via File -> Utilities -> Import NinjaScript.

Category NinjaTrader 7 Indicators 
Suggest other entries I might like
Details: Visual SMA Multi-Timeframe
Category: NinjaTrader 7 Indicators 

September 29th, 2012
Size: 48.34 KB
Downloaded: 7070 times

Keywords: movingaverage mtf multi-timeframe sma
Decycler Indicators - DecyclerOscillator_V1 5 *
Decycler indicators Exported with NinjaTrader 7.0.1000.30

Note: The download on this entry and the one on the SimpleDecycler entry are the same and contain both indicators.

Revised 11/1/15


1 Ability to change plot colors and line widths.
2. Remove all code related to the signals produced for Bloodhound.
Another indicator which contains Bloodhound signals will be posted on the Bloodhound thread here.
3. Add basic signal codes to replace the Bloodhound codes.
4. Correct minor problem in code in formula calculation
5. Change the percent parameter to accept the more standard notation xx.y (%).

>>>End Revisions 11/1/15<<<

The two indicators provided, the Decycler Oscillator and the Simple Decycler, are based on the writing of John F. Ehlers published in the September 20015 issue of Stocks & Commodities magazine. The implementation used as the basis for this version was provided by NinjaTrader(NT). Although both indicators are contained in the download they are described separately. This entry describes the DecyclerOscillator.

The screenshot shows the DecyclerOscillator with modified version of the SimpleDecycler set to appear like the NT provided version (which can be downloaded here). Installing the NT version will not disturb the indicators provided as they are prefixed with “fpg”.

In the article Mr. Ehlers describes a class of filters known as high-pass filters which “allow the high-frequency components in the data to pass through to the filter output, and reject the low-frequency components”. He goes on further stating, “Since high-pass filters have very little lag, here is the trick to computing a decycler: Subtract the high-pass filter output from the data input.” This is performed in the partner indicator, the SimpleDecycler. He also states that, “You can virtually eliminate lag by getting rid of those low-frequency components.”. Both indicators contain the same algorithm (which is left to the interested math and EE gurus to figure out what he is doing) for identifying the high-pass frequencies.

The article states that the oscillator is useful when two instances , with different parameters, are placed in the same sub-graph. The NT implementation requires this to be done manually which, among other things this modification can do optionally. There are 2 controlling parameters, the HPPeriod (default 125) and the K value (default 1). According to the article, “The second instance is plotted at 80% of the HPPeriod with an input K value of 1.2. The basic idea is to compensate for a 20% reduction in cycle period with a 20% increase in the amplitude swing (the K value) of the indicator.”.

Ehlers notes that “there will always be some whipsaw conditions, but these are relatively easy to remove with other conditional statements in the code.”. Unfortunately he does not offer any suggestions here. Another important item to note, the default HPPeriod is set to the value of a half year on a day chart, likely being used for detecting cycle reversals on stocks. However as further stated in the article, “Decyclers and decycler oscillators can be used over a very wide range of input filter parameters”, but here too he offers no suggestions. This will be an experiment to be conducted by the user. However, setting it too low does introduce choppiness.


1. The ability to request either the Slow, Fast, or Both plots (the “Plots Type” option).
2. Automatically adjust the fast indicator parameters by the specified percent (the “Percent” option) or to use the parameters specified by the user (the “ AsSpecified” option).
3. Three signaling options are provided: Off, Basic, and Extended (experimental for Bloodhound users). The Basic option provides the standard IntSeries values for the crossing (1, 0, -1). Extended signaling is described in the BloodHound thread here.
4. Optional smoothing for both the Fast and Slow Plots


If the Extended signaling option is selected additional but non-conflicting signals are sent to the same IntSeries used by the Basic signaling option.

Credits with my thanks to:
1. @Zondor and @Aligator for a formula used in the Extended signaling
2. @Jack22 for the formula and supporting code.

Change Log

9/29/2015 :- Initial release
10/1/2015 :- Correct error in algorithm code for calculating Fast plot in DecyclerOscillator
11/1/2015 :- Revisions are described at the top of this page

Category NinjaTrader 7 Indicators 
Suggest other entries I might like
Details: Decycler Indicators - DecyclerOscillator_V1
Category: NinjaTrader 7 Indicators 

November 5th, 2015
Size: 17.61 KB
Downloaded: 1875 times


© 2024 NexusFi™, s.a., All Rights Reserved.
Av Ricardo J. Alfaro, Century Tower, Panama City, Panama, Ph: +507 833-9432 (Panama and Intl), +1 888-312-3001 (USA and Canada)
All information is for educational use only and is not investment advice. There is a substantial risk of loss in trading commodity futures, stocks, options and foreign exchange products. Past performance is not indicative of future results.
About Us - Contact Us - Site Rules, Acceptable Use, and Terms and Conditions - Privacy Policy - Downloads - Top