ceramictilepro 

i didn't see a quick link or check box to say thanks so i'm writing it here. THANKS Fat Tails! this stuff is addicting!

Once you started coding, you will quickly get the hang of it. It is not so difficult, and in the end it is much faster and much more rewarding to do it yourself then come back to the forum for every little change.

ceramictilepro 

i didn't see a quick link or check box to say thanks so i'm writing it here.

It's because you haven't marked a post as "Answered" yet. You should have a huge blue box on every post that says "If this post has helped to answer your question, then click Answered".

Mike

looking to print the ADX line only from the DM indicator?

thank you!

 

Code

Value.Set(sum == 0 ? 50 : ((Period - 1) * Value[1] + 100 * diff / sum) / Period); DiPlus.Set(diPlus); DiMinus.Set(diMinus); Print ?

 

Code

//Print (diPlus);yes //Print (sumTR);no //Print (Tr);no //Print (tr);no //Print (value);no //Print (Value);no //Print (trueRange);yes //Print (sumtr);no //Print (sumDmPlus);no //Print (period);yes //Print (dmPlus);no //Print (sum);yes Print (sum == 0 ? 50 : ((Period - 1) * Value[1] + 100 * diff / sum) / Period);

i just had to try just about everything i could see. typical hack!

ceramictilepro 

looking to print the ADX line only from the DM indicator? thank you!   Code Value.Set(sum == 0 ? 50 : ((Period - 1) * Value[1] + 100 * diff / sum) / Period); DiPlus.Set(diPlus); DiMinus.Set(diMinus); Print ?

I spent the good part of last evening attempting to tweak the RSICeramictilePro indicator found on page 1 of this thread. My goal was to simply have the signal line be one color when it's above the zero line and another color when it's below the zero line. I don't need the average line to change colors.

I downloaded many different "color" indicators and tried to cut and paste what I though might work, but to no avail. I'm pretty much sitting at square one.

Any help would be appreciated.