The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.
ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.
Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.
ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.
Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
For further details on updates, also see SessionVWAP Daily V43.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.
ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance:The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.
Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
For further details on updates, also see the SessionVWAP Daily V43.
Update January 25, 2012: Minor enhancements. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Indicators will only run on NT 7.0.1000.5 or later.
This is an indicator that plots pivots for a n-day rolling period. It has similar features as the Daily Pivots indicator from the Session Pivots family. The default setting for the lookback period is 3 days. The midline is identical with the 50% Balance Point Indicator.
Options: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the rolling period .
Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are adapted to dark chart backgrounds.
Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template retracements and expansions can be only calculated from the full session high and low. If you want to calculate retracements and expansions from the regular session, it is recommended to use a multi-session template that divides the day into the night session, regular session and after-session.
Use of daily data on intraday charts: The rolling pivot indicator is designed to load daily data, if the option for "Calculate from session" is set to “Daily Bars”. This the data used by the indicator:
"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.
Auto setting: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.
VWAP: The VWAP of the rolling period is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.
GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.
Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX.
Update June 5, 2011: New signature for GetNextBeginEnd() implemented.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 20, 2011: Serialization of the plots changed.
Update December 17, 2011: Levels R5, S5 and pivot range added. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update July 7, 2012: Shading for Jackson Zones added.
Update December 15, 2013: Indicator entirely redesigned. Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Detailed explanations how to use the indicator can be found here:
Options for the Pivot indicators: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the prior session.
Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are better adapted to dark chart backgrounds.
Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template only ETH pivots can be displayed. For displaying RTH pivots, it is recommend to use a multi-session template that divides the day into the night session, regular session and after-session.
Use of daily data on intraday charts: The 3 pivot indicators are designed to load daily data, if the option for Settlement/Close is set to “Daily Bars”. This the data used by the indicator:
"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.
Auto setting for the 3 pivot indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.
VWAP: The VWAP of the prior day is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.
GLOBEX holiday sessions with settlement next day: The indicator is preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.
Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers - only available for zone width 0 - are now correctly formatted for US interest rate futures and FOREX.
Update June 5, 2011: New signature for GetNextBeginEnd() implemented.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 20, 2011: Serialization of the plots changed.
Update September 13, 2011: Zones were not plotted correctly, when indicator was set to "UserDefinedValues".
Update December 12, 2011: Weekly and monthly pivots added. Levels R5, S5 added. Some labels changed. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update July 26, 2012: Weekly and monthly pivot zones could be displayed for incomplete periods in DailyBars mode. Indicators now check whether the data for the prior week / prior month is complete.
Update December 13, 2013: Indicators entirely redesigned. Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Detailed explanations how to use the indicator can be found here:
Options for the Pivot indicators: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the prior session
Options for the OHL indicators: Open, high and low of the current period, Fibonacci retracement levels calculated from current high and low, noise bands, target bands based on the average daily/weekly/monthly range.
Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are adapted to dark chart backgrounds.
Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template only ETH pivots, ETH OHL and ETH noise and target bands can be displayed. For displaying RTH pivots, it is recommend to use a multi-session template that divides the day into the night session, regular session and after-session.
Use of daily data on intraday charts: The 3 pivot indicators are designed to load daily data, if the option for "Calculate from session" is set to “Daily Bars”. This the data used by the indicator:
"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.
Auto setting for the 3 pivot indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.
VWAP: The VWAP of the prior day is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.
Auto setting for the 3 OHL indicators: The Auto setting will preselect the third intraday-session as the regular session for FOREX & currency futures, but preselect the second intraday-session for all other instruments.
Noise Bands: The OHL indicators can be used to display noise bands. The noise is determined by averaging the smaller move Min (High – Open, Open – Low) over N1 & N2 days. The average values are displayed in a data table. The noise is added to and subtracted from the current open.
Target Bands: The OHL indicators can be used to display target bands. The targets can be determined in two different ways: Either the average daily range over N1 & N2 days is added to the current low (high projection) or subtracted from the current high (low projection), or the daily expansion from the open Max(High – Open, Open – Low) is averaged over N1 & N2 days and added to and subtracted from the open. The average daily range or average daily expansion is shown in the data table.
GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.
Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update May 24, 2011: Due to a bug, the new signature for GetNextBeginEnd() is only implemented for OnBarUpdate() but not for Plot() Override.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 11, 2011: Indicator reshaped, small bug removed that affected weekly ETH pivots after a holiday that fell on a Monday.
Update July 20, 2011: Serialization of the plots changed.
Update December 12, 2011: Levels R5, S5 added. Some labels changed. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update January 6, 2012: Holiday fields added for anaCurrentDayOHLV38
Update June 20, 2012: Shading added for Pivot Range and Jackson Zones
Update February 16, 2013: Indicators entirely redesigned. Holiday calendar added for 2013. The former SessionNoiseBands & Session Volatility Bands have now been integrated into the CurrentOHL indicators.
Update March 11, 2013: No added features, but 2 bugs removed that had affected the plots with specific settings.
Update March 13, 2013: Bug removed, RTH pivots did not work, when data table was unselected.
Update April 10, 2013: Plot modified for compatibility with charts built from multiple bar series
Update May 10, 2013: Regular close can now be displayed for the remaining hours of the trading day. Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update January 22, 2013: CurrentDayOHLV42 did not display pivots for prior days when set to RTH. Bug removed.
Update September 17, 2014: With indicator setting "RTH" current day's range is now displayed as 0 during the night session.
Update September 20, 2014: Minor update, data table for ADR/ADN now plots on top of the indicator plots. Indicator plots can now be accessed via SHIFT + mouse wheel to change the Z-Order of the indicator.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Update February 11, 2015: Minor update. Formatting of ATR/Noise improved for currency pairs with quote currency JPY.
Detailed explanations how to use the indicator can be found here:
Hello Traders, after using the original PivotsPlus on several chart types, I found that the settlement value was somewhat dependent on chart type, so I changed the lookup of the value to use a synthesized 1min chart making the value independent of the chart type. There are constraints that will prevent the indicator from working on some extreme chart types, but it works for the ones that I have tried (minute, range, tick, unirenko). Let me know of any difficulties that you may experience.
Here is the original post description...Hello Traders, I have added several important levels to the standard NT Pivots indicator. The additions are yesterdays high, low, mid, cash close, RMS High and Low values as well as todays high and low values. The indi also calculates upper and lower bands around the Pivot, R1 and S1. All plots are available to set the weight, color and type of plot. The plot labels can be adjusted xx bars left of the right margin with the 'Width' parameter.
December 26th, 2014
Size: 9.42 KB
Downloaded: 308 times
1604
bobc635
View enlarged thumbnail
Version 1.3 - See Changelog below
What it does: This priceline allows for limiting the size of the priceline, and includes the Bid/Ask spread above and below its plot. It updates using the MarketData for Bid/Ask when available. It has been adjusted to work with non-market data charts such as Indexes.
- Allows you to set the width in bars you want the priceline to show so you can limit the line to only showing in recent activity and not when you are reviewing historical data.
- Can set the period to zero to make the priceline infinite (like most price lines)
- Bid/Ask data is shown above and below, its width is dependent on both the spread and the last traded price, ie if Last Price is also the bid price, the bid bar will have the priceline running through it and the ask price smaller. It also handles when the spread increases, giving you a heads up on a market slowing down or speeding up!
Setup: Add the indicator, choose the width of your line (or leave the default 0 for infinite). You may also choose the colors of your Bid, Ask Areas and Price Line color.
.
.
.
Moved the plot of the Priceline to the onBarUpdate section to allow the indicator to work on Index charts.
Added an Param setting for the width of the Bid/Ask areas.
Added Params for setting the color of the plots.
Fixed several bugs with missing data that caused the line to not show.
-Version 1.3 - 10/10/15 - Fixed a bug for when there is no Bid/Ask info so it will still plot the line. Changed the max bid/ask width to 255 bars (chart speed issues)
December 5th, 2014
Size: 2.86 KB
Downloaded: 495 times
1595
Zxeses
Exported using NT Version 7.0.1000.26
The indicator can be used to display the opening hours of the Tokyo, London and New York FOREX markets. For each of the three FOREX markets a different background color can be selected. For the overlapping hours the background colors are blended.
Below are listed the default settings for the opening hours, which are user selectable. Please keep in mind that you have to use the appropriate time zones, when entering the opening hours.
Tokyo: 9:00 AM - 5:00 PM TST (Tokyo Standard Time)
London: 7:00 AM - 4:30 PM GMT (Greenwich Standard Time) or BST (British Summertime, from March to October)
New York: 8:00 AM - 5:00 PM EST (US Eastern Standard Time) or EDT (Eastern Daylight Time, from March to November)
There is no daylight saving time in Japan. Therefore the Tokyo/London overlap is about two hours in summer, but only one hour in winter. The London/New York overlap is typically three and a half hours. However, London and New York observe different daylight saving schedules. During the last two weeks of March and during the first week of November, New York is on summertime while London is on standard time. During these three weeks the overlap is increased to four and a half hours.
The indicator handles the conversion of the trading hours of the three major FOREX markets automatically.
Update September 1, 2013 : Bug removed, indicator did not work correctly on charts built from tick data.
Update December 5, 2014: Option added to change color and opacity for off-session times.
Update April 22, 2015: Code simplified.
March 9th, 2023 05:21 PM MONICAP hello, and thanks for your time developing and sharing this indicator. i want to ask if this could be available for NT8
also. thank you
September 16th, 2022 07:30 PM TomTownsend Very helpful, thank you, and for all you do!!!
February 19th, 2019 06:43 AM Anand Jagdeo good morning. I am fairly new to trading and would like to use this indicator. am i supposed to change the dates for the
se holidays to the current year. Please advise. Seems like a pretty good indicator if applied properly. Thanks
Anand
June 9th, 2017 11:10 AM mercyj does anyone know why I can't set the autoscale to FALSE? it's greyed out. and the pivots are all wacko on the chart
August 10th, 2015 04:17 PM skibbatechno Awesome work - thank you!
August 10th, 2015 04:14 PM skibbatechno Awesome work - thank you!
March 30th, 2014 11:37 AM jmont1 Fat Tails, help me understand. Most of the year Europe closes at 11:30 NY time. Moving to March it seems to close at 1
2:00 pm. I see NY went to DST and UK uses BST. But why is it now closing on the hour (12) instead of 1/2 hour? Tried
researching but cannot resolve. THANKS for this to help me out.
September 15th, 2013 10:36 PM Jarmat Thank you great job.