Search

Categories

Show

Help

Search Results

Searching for entries matching volatility, looking in keywords for any words
Found 19 matching entries

Page 2 of 2

Entries

SessionVolatilityBands V38

Exported using NT Version 7.0.1000.7

This indicator is an old version and there will be no more maintenance. All the features have now been integrated with the SessionPivots indicator that can be downloaded here:

https://nexusfi.com/download/ninjatrader-7/indicators/371-download.html?view

The indicators that come with the SessionPivots package also allow to display weekly and monthly average ranges.

Indicator will only run on NT 7.0.1000.5 or later.

The indicator detects the Average Daily Ranges (ADR) for two selectable periods and uses them to calculate intraday targets, which are displayed as volatility bands. The upper target band is calculated by adding the average daily ranges for the two periods to the current session's low. The lower band is calculated by subtracting the average daily ranges from the current day's high.

All daily ranges and bands can be calculated and displayed for the full session or any intraday (RTH) session defined via the template. It is recommended to display both ETH and RTH volatility bands by applying the indicator to the chart twice with different settings.

The indicator also can display OHL and Dynamic Fib Lines for the current session.

Indicator Settings

Band Type: The bands will auto-adjust to the current day's high and low, until the expected daily range is exceeded for both of the lookback periods. In this case the bands will freeze and change color (Band Type "Freeze"), stop (Band Type "Stop") or further expand (Band Type "Expand", requires a second expansion target).

Default BandRange: The default setting uses 100% of the ADR of the selected period. Instead of using 100% you can select any other percentage to calculate the intraday target bands.

Expanded BandRange: This is required for the Band Type "Expand". The default setting uses 127% of the ADR of the selected period. Instead of using 127% you can select any other percentage to calculate the second level of the intraday target bands.

Include After-Session : If set to true, the volatility bands of an intraday session will be extended to the next session, the after-session, but not recalculated. Default value is "false".

Period(1) for the average daily range: This is the period used to calculate the shorter average daily range. Default value is 3 days, maximum selectable is 100 days.

Period(2) for the average daily range: This is period used to calcualte the longer average daily range. Default value is 10 days, maximum selectable is 100 days.

Session: Select between the full ETH and the RTH session. Default value is "ETH."

Session for RTH: Select the RTH session, for which you want to display the bands. For FOREX, you would select "First" for the Asian session, "Second" for the European session and "Third" for the US session, if you use a session template with 3 intraday sessions. For ES you would select "Second", if your session is divided into night and day session. Default value is "Second". This option only applies, if "RTH" has been selected under "Session". A hybrid setting selects the third intraday session for FOREX and currency futures, and the second intraday session for all other futures contracts. Only select it, if you use triple session templates (Asian, European, US) for FOREX and Currency Futures.

Show Current Open: Selects or unselects Current Open.

Show Dynamic Fib Lines: Selects or unselects intraday Fibonacci retracements. Fib retracements will only be shown if Show High/Low is set to true.

Show High/Low: Selects or unselects to show the current day's high and low.

Show Projection Bands: Selects or unselects projection bands.

Show Projection Labels: Selects or unselects projection band labels.

Show Range Data: Displays average daily ranges and current day's range for the selected session in the upper left or upper right corner of the chart.

The indicator now calculates average daily ranges without using range data from Globex holiday sessions.

Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX. FOREX ranges are displayed in PIPS.
Update June 2, 2011: New signature for GetNextBeginEnd() implemented.
Update June 20, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update June 25, 2011: Band colors were not serialized and therefore did not keep the selected color, when saved as part of a template or workspace.
Update July 11, 2011: Different band types are available. Once the daily target range has been exceeded, bands will change color and can be frozen, further expanded or cut off.
Update July 18, 2011: Serialization of the plots changed.
Update September 11, 2011: Expanded bands did not display correctly on days when both upper and lower range targets were hit. Bug removed.
Update September 24, 2011: ChartControl checked for null, indicator can now be called by strategies.

Category NinjaTrader 7 Indicators

Details: SessionVolatilityBands V38
Category: NinjaTrader 7 Indicators

July 11th, 2011
Size: 13.43 KB
Downloaded: 3386 times

Keywords: dailyrange range session volatility

SessionVWAP Bimonthly/Quarterly/Annual (amaNMonthlyVWAP)

Version 2.0 August 11, 2017

The N-Monthly VWAP is the volume-weighted average price (VWAP) of a security for the selected N-month period. The VWAP gives a fair reflection of the market conditions throughout the selected period and is one of the most popular benchmarks used by large traders.

The N-Monthly VWAP can be set to calculate for the entireperiod or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to �Calculate� = �On price change�. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.

Category NinjaTrader 8 Indicators and More

Details: SessionVWAP Bimonthly/Quarterly/Annual (amaNMonthlyVWAP)
Category: NinjaTrader 8 Indicators and More

September 5th, 2017
Size: 10.14 KB
Downloaded: 1423 times

Keywords: annual bimonthly monthly quarterly quarterrange semiannual session standarddeviation volatility volume volumeweighted vwap

SessionVWAP Daily (amaCurrentDayVWAP)

Version 2.5 October 27, 2019

The Current Day VWAP is the volume-weighted average price (VWAP) of a security for the current day�s trading session. The VWAP gives a fair reflection of the market conditions throughout the trading day and is probably the most popular benchmark used by large traders.

The Current Day VWAP can be set to calculate for the entire trading day or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to �Calculate� = �On price change�. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current session.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates. Therefore it is recommended to select an early anchor point and only use VWAP and volatility bands once they have stabilized.

Category NinjaTrader 8 Indicators and More

Details: SessionVWAP Daily (amaCurrentDayVWAP)
Category: NinjaTrader 8 Indicators and More

September 4th, 2017
Size: 9.72 KB
Downloaded: 4296 times

Keywords: quarterrange session standarddeviation volatility volume volumeweighted vwap

SessionVWAP Monthly (amaCurrentMonthVWAP)

Version 2.0 August 11, 2017

The Current Month VWAP is the volume-weighted average price (VWAP) of a security for the current month. The VWAP gives a fair reflection of the market conditions throughout the trading month and is one of the most popular benchmarks used by large traders.

The Current Month VWAP can be set to calculate for the entire trading month or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to �Calculate� = �On price change�. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.

Category NinjaTrader 8 Indicators and More

Details: SessionVWAP Monthly (amaCurrentMonthVWAP)
Category: NinjaTrader 8 Indicators and More

September 5th, 2017
Size: 9.93 KB
Downloaded: 1345 times

Keywords: monthly quarterrange session standarddeviation volatility volume volumeweighted vwap

SessionVWAP Weekly (amaCurrentWeekVWAP)

Version 2.0 August 11, 2017

The Current Week VWAP is the volume-weighted average price (VWAP) of a security for the current week. The VWAP gives a fair reflection of the market conditions throughout the trading week and is one of the most popular benchmarks used by large traders.

The Current Week VWAP can be set to calculate for the entire trading week or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to �Calculate� = �On price change�. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current week.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.

Category NinjaTrader 8 Indicators and More

Details: SessionVWAP Weekly (amaCurrentWeekVWAP)
Category: NinjaTrader 8 Indicators and More

September 4th, 2017
Size: 9.89 KB
Downloaded: 1696 times

Keywords: session standarddeviation volatility volume volumeweighted vwap weekly

Squeeze

Version 1.0

gemSqueeze is a modified squeeze indicator that also brackets bars during the squeeze to help visually identify breakouts.

Category NinjaTrader 8 Indicators and More

Details: Squeeze
Category: NinjaTrader 8 Indicators and More

April 12th, 2020
Size: 15.29 KB
Downloaded: 1631 times

Keywords: breakout momentum squeeze volatility

SuperDrive

Exported using NT Version 7.0.1000.2

This is an improved version of the drive indicator.

The indicator detects both volatility and momentum and shows the relationsship between bullish momentum or bearish momentum and volatility.

Volatility is measured via the absolute value of the indicator. You will notice, how it moves up during the day session and moves down during the night session.

Momentum is measured as the difference between the two lines. Positive momentum is shown as green and negative momentum is shown as red. The momentum is measured via the enhanced momentum indicator, which is included.

The lines are smoothed with a Hull moving average for display.

Category NinjaTrader 7 Indicators

Details: SuperDrive
Category: NinjaTrader 7 Indicators

January 12th, 2011
Size: 11.63 KB
Downloaded: 2074 times

Keywords: drive momentum trendfilter volatility

Volatility Scalper (EA)

This strategy uses the volatility indicator to place trades based on increases in short term volatility. The strategy compares the volatility indicator to a moving average to define periods of increased volatility. When the volatility reading crosses the volatilities moving average, volatility is defined as up and a trade is placed.

When volatility is up, an entry to buy is placed at the upper price channel, and an entry to short is placed at the lower price channel. If volatility is not above the moving average, then no entries are made.

This strategy was created by James Stanley of the DailyFX.com course department.

Category FXCM Strategy Trader (hidden)

Details: Volatility Scalper (EA)
Category: FXCM Strategy Trader (hidden)

April 12th, 2011
Size: 2.59 KB
Downloaded: 266 times

Keywords: volatility

Z-score (amaZScore)

Version 1.3 September 25, 2017

The Z-score or standard score is a numerical measurement of a value�s relationship to the arithemic mean of the data set. The Z-score is the signed number of standard deviations by which the current value of a data point is above the mean value or below the mean value as calculated for the selected lookback period.

For a normally distributed sample 95.8% of the z-scores of all data points fall within the range [-2, +2]. A Z-score of 0 indicates that the data point is identical with the arithmetic mean of the data set.

The Z-score is a normalized oscillator that can be used to identify extreme readings of the input series. The Z-score is calculated by dividing the absolute difference between a data point and the arithmetic mean by the standard deviation.

One of the main applications of the Z-score is that it can be used to normalize any oscillator. For example, the MACD is a non-normalized oscillator which does not pass the c-test introduced by William Eckhardt. However, when the Z-score is used to normalize the MACD, the resulting oscillator uses a normalized scale and will pass the c-test. The normalized MACD is obtained, when the MACD is used as the input series for the Z-score.

Category NinjaTrader 8 Indicators and More

Details: Z-score (amaZScore)
Category: NinjaTrader 8 Indicators and More

May 9th, 2018
Size: 2.54 KB
Downloaded: 915 times

Keywords: normalized oscillator standarddeviation volatility zscore

Page 2 of 2