I found this HA indicator on NT site. Colors HA candle wicks with the actual candle color. Also allows HA to be viewed as an indicator line and lets you choose the amount of smoothing.
This indicator draws horizontal Support/Resistance lines at various price levels, above and below the market, where price historically created swing High/Low pivots multiple times, creating support and resistance as price action bounced off of those levels.
This strategy uses the volatility indicator to place trades based on increases in short term volatility. The strategy compares the volatility indicator to a moving average to define periods of increased volatility. When the volatility reading crosses the volatilities moving average, volatility is defined as up and a trade is placed.
When volatility is up, an entry to buy is placed at the upper price channel, and an entry to short is placed at the lower price channel. If volatility is not above the moving average, then no entries are made.
This strategy was created by James Stanley of the DailyFX.com course department.
"Index" is a multi-purpose multi-instrument indicator. It can be use to plot a 2 (or more) instrument spread, a total portfolio value, a 2 (or more) instrument pair or basket trade price, a multi-instrument index of your own creation, or even to calculate a major index (mainly useful for demonstration purposes). It works with "CalculateOnBarClose" set to either false (real-time) or true (for lower CPU overhead).
Parameters are:
1) SymbolList: a comma-delimited list of symbols
2) WeightList: a comma-delimited list of weights (1 per symbol; or a single weight (default: 1) for all symbols)
3) Divisor: A number (default: 1) divided into the sum of (symbols x weights)
4) NoOutputWhenMissingInput: (default: false) if true, plot will be blank for any bars which have a missing input; if false, the last known good output will be repeated.
5) OldestDataMinutes: Input is considered missing if older than this many minutes. If set to 0 (default) Input is considered missing if older than 1 bar. In no event will it use data from a prior day (if the symbol hasn't opened yet today, it is considered missing).
The ""Input Series" for the indicator is NOT used in the calculation; it is the "clock" that drives the output, and must be time-based (i.e. minute, day, etc. bars). The Input Series should be an active instrument (no missing bars). If you want to plot this indicator on a non-time-based chart (i.e. volume bars), you need to add a time-based data series to the chart, and select that as the "Input Series" to the indicator. This indicator may be used as input to another indicator, but if so you must press "F5" after adding it to the chart due to NT7 issues. Exported using NT version 7.0.1000.3
Usage Examples:
(1) Plot a pair trade spread: Long 3 INTC, Short 7 AMD
SymbolList: INTC,AMD
WeightList: 3,-7
Divisor: 1
(2) Plot the spread between two futures months:
SymbolList: ES 06-11,ES 09-11
WeightList: 1,-1
Divisor: 1
(3) Plot the value of a portfolio: 100 SBUX, 300 ACN, 100 AAPL, 200 CAT, 400 T, 100 GLD
SymbolList: SBUX,ACN,AAPL,CAT,T,GLD
WeightList: 100,300,100,200,400,100
Divisor: 1
Reproducing a major index is not especially useful because index quotes and history are easily available from data providers.
The following examples show how they are created, so you can create your own index that has meaning to you.
(4) Plot the Dow Jones Industrial Average (a price-weighted index)
SymbolList: MMM,AA,AXP,T,BAC,BA,CAT,CVX,CSCO,KO,DD,XOM,GE,HPQ,HD,INTC,IBM,JNJ,JPM,KFT,MCD,MRK,MSFT,PFE,PG,TRV,UTX,VZ,WMT,DIS
WeightList: 1 (DJIA is price weighted, all components have equal weight)
Divisor: 0.132129493 (the Dow Divisor as of 7/2/10, see https://www.cmegroup.com/trading/equity-index/files/djia-history-divisor.pdf)
(5) Plot SOX (a market-cap weighted index, weights are shares outstanding on 2/20/11, shares and divisor are from from https://indexes.nasdaqomx.com)
SymbolList: ALTR,AMAT,AMD,ATHR,AVGO,BRCM,CREE, CRUS,HITT,INTC,KLAC,LLTC,LRCX, MKSI,MRVL,MU,NETL,NSM,NVDA, NVLS,POWI,RBCN,SNDK,STM,TER, TSM,TXN,VECO,WFR,XLNX
WeightList: 364951315,2060521585,1396802719,146660859,490415275, 575686296,196473483,141628229, 63130703,1212702808,342283544, 392826431,251960161,103124900,
1105594919,1763931357,130849166, 490825711,941628062,184777433, 57263098,46993684,287133221, 153857427,371654361,1191268991, 805417714,81755766,465958033, 472202863
Divisor: 822180367
April 12th, 2011
Size: 10.93 KB
Downloaded: 665 times
889
kevind
Nice colored Stochastics Indicator. Set it at 4,8,1 for daytrading and you will hit the high and low peaks really well. I have been using for a while and didn't see one like this posted on the site so hear it is.
Nice colored Stochastics Indicator. Set it at 4,8,1 for daytrading and you will hit the high and low peaks really well. I have been using for a while and didn't see one like this posted on the site so hear it is.
This is a fast version of the MACD BB Lines indicator. The MACD settings and the band period, the multiplier for the standard deviation, the dotsize and all colors can be selected.
Different colors can be selected for dots outside and inside the Bollinger Band.
Connector line added between the MACD dots.
Unlike previous indicators this indicator can also be used on multiseries charts or charts with equidistant bar spacing set to "false".
The default colours are adapted to dark backgrounds. Special thanks to Zondor for speed-optimizing the code.
UPDATED April 22, 2011 to add a histogram feature (difference between MACD and its AVERAGE line).
Version 4, exported using NT Version 7.0.0.22 includes these enhancements (all optional):
Background coloring (flooding):
Color background, only colors the background of the indicator.
Color ALL Backgrounds, colors all indicator panels, including the price bar panel.
With ALL set to True and Price bar coloring set to true, and the sounds options set to True, you can concentrate on the price bar panel, without having to watch the indicator panel.
Conservative mode: Set to "True", the indicator will color the price bars and background when the MACD crosses above or below the Zero line (Lime, above Zero, Red, below Zero. All colors are user-selectable).
Conservative mode: Set to "False", the indicator will color the price bars and background when the MACD crosses its BB Average line, giving you more opportunities for scalping within the current price move.
BB Violation dots: An option may be chosen to paint a "double dot" on the price bar screen when the MACD BB dot violates the Bollinger Band (exits outside the band). If it re-enters the band, the condition resets, so that the next time it exits the band, another "double dot" paints on the price bar chart.
Sounds: Sound options may be chosen to play when the BB dot exits the BB Band (up sound & down sound). Sound options may be set to play when the MACD crosses (up or down) on the Zero line (up sound & down sound).
Price Bar coloring (PaintBars): You can set the color of the UP bar, DOWN bar and the OUTLINE of each. To achieve "hollow" style UP bars, simply set the UP bar color to "transparent" and then set the Outline to any color of your choice. Defaults are Lime (up bar), Black (outline), Red (down bar), Black (outline).
In the attached example, I am using it on a 4 MedianRenko bar chart with the indicator set to:
# of Std Deviations = 0.05
Band Period = 10
Dot Size = 1
Fast MACD = 60
Slow MACD = 120
Smooth = 30
The defaults are:
# of Std Deviations = 1
Band Period = 10
Dot Size = 2
Fast MACD = 12
Slow MACD = 26
Smooth = 5
Thanks to Jeff Castille for suggesting these enhancements.
August 6th, 2012 01:01 PM gentech I love this! You're a genius! It's perfect for my system.
October 6th, 2011 03:26 PM ulgolog Thank you! I was just about to leave you a note asking if you made any progress... Fantasticly simple and useful. :co
ngrats:: )
September 18th, 2011 03:28 PM marxtone Thank You !!!
August 18th, 2011 07:59 PM rutherfordk Perfect !! Thank you.
September 14th, 2018 09:29 PM BKOp One more request for an NT8 version. I haven't found another indicator that can handle the oil crack spread 3 instrument
s with multiplication, and have moved from NT7 to NT8.
June 19th, 2017 03:54 PM jmont1 Great indi !!! Any chance U R doing an NT8 ? I have tried converting it without success.
December 4th, 2012 03:53 PM dilbert618 Great idea, Thank you
October 5th, 2011 01:12 PM MWinfrey Cool indicator...now I don't have to write one myself.
August 4th, 2011 04:51 AM Sim22 Thank you could be useful
August 14th, 2017 04:35 AM petkolichev Hi, how can i implement it as an indicator in my NT7?
Thank you.
April 24th, 2017 09:40 AM Target Thank you for sharing.
September 16th, 2014 03:27 AM Andrewt Thanks, this is just what i am looking for, Have you made any upgrades or improvements since this was posted? And do you
have anything like this that works without Gomi's pack? cheers ANdrew
November 6th, 2013 02:53 AM TLF69 FOR THIS SUPER SHARING, GOOD WORK THANKS