Search

Categories

Show

Search Results

Searching for entries matching stochastic momentum, looking in title and description, keywords for any words
Found 116 matching entries

Page 6 of 12

« First

Last »

Entries

MACDColorsEmail2

This is an indicator I had written a while back that emails a screenshot and has audio alerts when the average crosses 0. There are a couple other ideas I was trying to make the cross more noticeable that's why its got some non standard features in it. Its the sister alert to the stochastic one I uploaded awhile back. I used it to send me alerts when I was at work Hopefully someone finds it useful.

Chris

Category The Elite Circle

Details: MACDColorsEmail2
Category: The Elite Circle

July 6th, 2013
Size: 6.46 KB
Downloaded: 304 times

Momentum BB Lines

This is the conversion of the NinjaTrader 7 "Momentum BB Lines" indicator to MultiCharts.

According to FatTails, the developer of the NinjaTrader indicator:

Quoting

The Momentum BB Lines is an indicator, which is similar to the MACD BB Lines. However, it is not based on the MACD, but on a smoothed, balanced momentum.

The balanced momentum is obtained, when the input value one period ago is replaced with a triangular momentum. This avoids that wide ranging bars which drop out of the momentum calculation have an impact on the momentum line.

The balanced momentum is exponentially smoothed with a selectable smoothing period. The BB Lines are Bollinger Bands, which use the same period for the standard deviation as is used for the balanced momentum before smoothing. The Bollinger Bands are applied to the smoothed momentum.

Different colors can be selected for a rising and falling smoothed momentum and for dots outside and inside the Bollinger Bands.

Since the Momentum BB Lines indicator uses multiple colors, I've chosen to hard code these in the indicator to prevent cluttering of the MultiCharts status line. Changing the code to different colors is quite easy, and here you can find a list of RGB colors to use.

This indicator also includes the Momentum Modified indicator that was included in the original NinjaTrader indicator.

If you like this indicator, please go over to this page and give the original author of this indicator (FatTails) a thanks.

Category MultiCharts

Details: Momentum BB Lines
Category: MultiCharts

February 7th, 2012
Size: 12.21 KB
Downloaded: 566 times

Keywords: bollinger momentum oscillator

Momentum BB Lines

Exported using NT Version 7.0.1000.8

The Momentum BB Lines is an indicator, which is similar to the MACD BB Lines. However, it is not based on the MACD, but on a smoothed, balanced momentum.

The balanced momentum is obtained, when the input value one period ago is replaced with a triangular moving average. This avoids that wide ranging bars which drop out of the momentum calculation have an impact on the momentum line.

The balanced momentum is exponentially smoothed with a selectable smoothing period. The BB Lines are Bollinger Bands, which use the same period for the standard deviation as is used for the balanced momentum before smoothing. The Bollinger Bands are applied to the smoothed momentum.

Different colors can be selected for a rising and falling smoothed momentum and for dots outside and inside the Bollinger Bands.

The indicator has an option to plot paint bars showing whether the smoothed momentum is sloping up or down and whether it is outside or inside the Bollinger Bands.

Category NinjaTrader 7 Indicators

Details: Momentum BB Lines
Category: NinjaTrader 7 Indicators

February 6th, 2012
Size: 10.67 KB
Downloaded: 1687 times

Keywords: bband bollinger momentum momentumbblines triangular

Momentum of Cumulative Delta - broke in 8.0.17.0

Pretty standard momentum of both CD and a separate one for price included.

Both are adaptive if Period is less than 1 (typically choose 0.07), but the default is set to a Period of 14 (it is also a lot faster due to adaptive period calculations).

Both identify peaks exposed as a series (+/- 1).

They need MathNet again - check out https://nexusfi.com/elite-circle/45801-keeping-eye-big-players.html

Reference - https://nexusfi.com/elite-circle/45804-meanderings-cumulative-delta.html

Category The Elite Circle

Details: Momentum of Cumulative Delta - broke in 8.0.17.0
Category: The Elite Circle

December 8th, 2018
Size: 18.95 KB
Downloaded: 719 times

Momentum Smoothing V1

This indicator is based on tradestations free momentum indicator but I added a feature that is a histogram by default, smooths the histogram, adds a moving average to the histogram and reference lines in the suubgraph.

Category The Elite Circle

Details: Momentum Smoothing V1
Category: The Elite Circle

January 4th, 2012
Size: 8.99 KB
Downloaded: 1166 times

Keywords: momentum smoothing tradestation

MomStop (momentum stop) V2

This is momentum stop indicator so it pick a reversal point based on price action. It uses nothing but price so I guess it is also a PA indicator.
template is here
https://nexusfi.com/traders-hideout/3500-momentum-stop-indicator.html

4/15/2010

-add more reversals

- add option to filter out bad signals using bar range

- add trade entry buy/sell line so that you can track the entry point visually

Category NinjaTrader 6.5 Indicators

Details: MomStop (momentum stop) V2
Category: NinjaTrader 6.5 Indicators

April 12th, 2010
Size: 2.69 KB
Downloaded: 1843 times

Keywords: cory momentum stop momstop

MTF momentum strategy focused on the ADXVMA

I've been working on a multi-timeframe momentum strategy focused on the ADXVMA for a few months now. It uses 4 Range bars for entries and 11 range bars for filters. No secrets, the code is below (keep it amongst the Elite brothers and sisters please).

Details here.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NOT TESTED [feedback]

Category The Elite Circle

Details: MTF momentum strategy focused on the ADXVMA
Category: The Elite Circle

December 3rd, 2009
Size: 4.08 KB
Downloaded: 685 times

Keywords: adx adxvma mxasj mtf

MTF Stochastic

This is a template using multiple instances of stochastic to try and eliminate whipsaws common to the single version. This is a template file.

Category MetaTrader 4 Indicators

Details: MTF Stochastic
Category: MetaTrader 4 Indicators

January 3rd, 2010
Size: 20.77 KB
Downloaded: 586 times

Keywords: mtf stochastic websouth

Multi-time Frame Stochastic

05/13/2012 NOTE: A newer version has been uploaded...(xcStoch)......
new version adds RangeNoGap...per requests from BMT members

xcStochastic...

In response to several BMT member requests to expand the "xc" series (crosschart) of indicators......this indicator will plot a Stochastic from about any Chart Type or Time frame on a different Chart Type or time frame.
The example shown is a 5min Stochastic running on a 1 min chart....(the original 5min chart is also shown just for comparison). The xcStoch will plot the 5min value on the 1min chart....
NOTE: Because the xcStoch draws based on the bar interval of the displayed chart, the Stochastic line may not change value for several bars when the "alternate" chart is a larger time period.....See the 'stairsteps' on the chart. In this configuration, StairStepping is NORMAL....not an error

xcStoch is selectable by Chart Type (Minute, Tick, Range)
and selectable by Chart Period.
D & K Plots are completely configurable as well (period, color, style, width, etc.) as are the high/low lines.

To increase the availability of this indicator to those who requested it, I am putting it in the "General Downloads" section instead of Elite....

Category NinjaTrader 7 Indicators

Details: Multi-time Frame Stochastic
Category: NinjaTrader 7 Indicators

August 5th, 2011
Size: 9.73 KB
Downloaded: 924 times

Murrey Math Buttons for eSignal

MurrayMathAltButtons.EFS (eSignal)
Older indicator by Chris Kryza still works great!

README for MurrayMathAltButtons.EFS
Current Version 3.3.0 - 04/28/2003
NOTE!!!!:
This script was developed and tested using the features available in:
eSignal Release Candidate 7.2
Build 541
Dated: 01/21/03
If you are using an earlier eSignal version, it is possible and even
likely that errors will be generated when you attempt to use this
script.
also... this particular release (3.2.0) makes use of the new features
available in Beta 566. If you don't have this Beta, don't worry and
the script will run just fine under an earlier version (as long as
your version is 7.2 Build 541 or greater!).

[INTRODUCTION]
If you are currently using an older version of this script, please
completely unload (i.e., the Remove option in the chart pop-up menu)
the old script from your Advanced Chart Template and then load this
new version. If you don't completely remove the old version first, then
any new parameters that have been added will not show up and errors will
likely be generated.
This script does a fairly good job of creating Murrey Math lines
in an eSignal chart. It is based on the work of Tim Kruzel found in
the public domain and, as tested, the numbers seem to match up with
Tim's AMM frame calculator program. The biggest recent addition is
the button feature which allows you to quickly change parameters
without going into the Edit Studies dialog.
Version history is available at the bottom of this ReadMe.
For information on Murrey Math please go to Murrey's web site
at www.murreymathtrading.com.

[KNOWN ISSUES]
Buttons - If you use the Buttons option (where buttons display on
the screen so you can quickly change frame size, etc.) you must
double-click on the buttons for the screen to refresh properly. Eventually
I will figure out how to make it all work with a single-click.
Frame Size - Size of 4 removed as an option and size of 8 added.
When using this script with Intraday bars there is a small issue with
grid alignment as the very first bar of the day is forming. For example,
if you load a 5-min chart with this script at 9:00am EST the last bar
displayed will be yesterday's closing bar (assuming you have a time
template that restricts display to market hours). The grid alignment
will be correct. At 9:30am, the market opens and the first 5-min bar of the
new day will begin to display. You will notice at this time that the Blue
start-of-frame vertical line will be (incorrectly) shifted one bar to the
right. The solution is to simply right-click in the chart and choose the option
at the bottom of the pop-up menu to reload the MurrayMathAlt.EFS script.
The script will then realign and you should have no further problems. This
issue only comes into play as the first bar of the day is forming and will
automatically correct itself after the first bar has completed. So, if you
are trading 1-min bars you probably won't even notice it, if you are trading
15-min bars then you should probably do the 'refresh' as described above. This
is on my short-list of things to fix.

[NOTES]
When using this script with Daily bars, the start-of-frame value
is based on the date of October 2, 2002 which I believe is the
correct value. This date will need to be changed each year (it is
one of the script options discussed below).
When using this script with intraday bars, the script will use the center-
point of the day (11:58am) to calculate the vertical time bars based upon
the frame size that is currently being used.
Intraday operation is probably best if used with an eSignal time template
that only displays bars during market hours (i.e., 9:30am - 4:00pm EST)
(4:15pm for Futures). This will force the MM calcs to skip the pre- and
post-market data. If, however, you wish to use this script with all sessions,
I see no reason why it wouldn't work for you.
[INSTALLATION]
Copy the EFS script file into one of your Formula Folders. Formula Folders
are typically found at C:\Program Files\eSignal\Formulas. You can copy it into
any of the available folders (e.g., BuiltIn, Helpers, Downloads, etc.).
The actual EFS file is heavily commented so if you have questions just load the
EFS file into the eSignal Formula Editor and review the code.
[SCRIPT OPTIONS]
Several options can be adjusted from within the eSignal Study Properties
window.
frSize: Frame Size. This can be set to 8,16,32,64,128 or 999 for AutoFrame. Default value is 64.
frOptIncrement: Optimum 1/8th Increment Size: This only comes into play if the frSize option is set to
999 which activates the AutoFrame feature. The AutoFrame feature attempts to find the
MM frame size that has 1/8th increments that most closely match the value that you set
in frOptIncrement. For example: When daytrading the S&P EMini, a 1/8th increment size of
2 ES points would be nice. To accomplish this, set the frSize option to 999 and then set
the frOptIncrement to 2.0. This will force the script to evaluate all frames sizes (e.g.,
8,16,32,64 and 128) and it will pick the one that results in 1/8th increments closest to
our 2 points.
frMult: Frame Multiple: This can be set to 1, 1.5 or 2. Default value is 1.5.
frIgnoreWicks: Ignore the wicks when computing High and Low prices. This can be set to 0 (don't ignore wicks) or
1 (ignore wicks). Default value is 1 (i.e., ignore wicks)
frSpeedUp: Draw (bot to top) speed lines in current price/time square. This can be
set to either 0 (don't draw) or 1 (draw). Default is 0.
frSpeedDn: Draw (top to bot) speed lines in current price/time square. This can be
set to either 0 (don't draw) or 1 (draw). Default is 0.
frMomUp: Draw (slanting upward) 45-degree momentum lines within the current price/time
square. This can be set to either 0 (don't draw) or 1 (draw). Default is 0.
frMomDn: Draw (slanting downward) 45-degree momentum lines within the current price/time
square. This can be set to either 0 (don't draw) or 1 (draw). Default is 0.
frCircles: Draw the circles on the chart. This can be set to either 0 (don't draw them)
or 1 (draw them). Default is 1.
frRightMargin: Max number of bars to extend to the right when creating a new Price/Time
square. The purpose of this option is to conserve screen space when a new
square is created. This can be set to any integer value. The default value
is 15. Note: no error checking is done so if you type in a non-numeric value
the script will likely generate an error. This feature now works with both
intraday and daily charts (previously was intraday only).
frStartDate: Base date for calculation of non-intraday frame start. Default setting is
October 2, 2002. This will need to be changed each year. Note: You must type
in the complete date (i.e., October 2, 2002 or April 4, 2000, etc.). NOTE:
frStartDate MUST be an actual trading day (e.g., not a Sat, Sun or holiday).
frUseButtons: Display buttons on the chart that allow you to quickly change frame sizes and
also to draw speed and momentum lines. This can be set to either 0 (don't display
buttons) or 1 (display buttons).
frTimeLines: Draw the vertical time lines on the chart. This can be set to either 0
(don't draw them) or 1 (draw them). Default is 1.

frBaby8: Draw lines and prices at mid-point of MM lines (e.g., Baby Eighths). This can be
set to either 0 (don't draw them) or 1 (draw them). Default is 0.
frVertColor: Draw the vertical time lines using the standard 8th colors or draw them as
grey lines. This can be set to 1 (use colors) or 0 (don't use colors). Default
is 0.
So, an example completed Edit Studies window would look like this:
frSize: 64
frOptIncrement: 2.0
frMult: 1.5
frIgnoreWicks: 1
frSpeedUp: 0
frSpeedDn: 0
frMomUp: 0
frMomDn: 0
frCircles: 1
frRightMargin: 10
frStartDate: October 2, 2002
frUseButtons: 1
frTimeLines: 1
frBaby8: 0
frVertColor: 0
Comments, bug reports, etc. should be posted in the EFS Studies Bulletin Board area
on eSignal Central or sent to me directly at [email protected].
Thanks.
Chris Kryza
[email protected]

Category MultiCharts

Details: Murrey Math Buttons for eSignal
Category: MultiCharts

August 8th, 2009
Size: 16.30 KB
Downloaded: 300 times

Keywords: multicharts

Page 6 of 12

« First

Last »