Nice colored Stochastics Indicator. Set it at 4,8,1 for daytrading and you will hit the high and low peaks really well. I have been using for a while and didn't see one like this posted on the site so hear it is.
February 12th, 2011
Size: 9.25 KB
Downloaded: 262 times
828
pfsmedical
Exported NinjaTrader Version 6.5 1000.17
Description
This is the original Pattern Recognition, with minor changes : the text and the arrow distance from the candle can be set. Also the text can be hide.
Simple Strategy:
Buy when KeltnerMulticolor midband is green (uptrend), and the price reverse right to the lower band and bullish pattern appears.
Exit at the opposite band.
Sell when midband is red (downtrend), and the price reverse to the upper band and bearish pattern appears.
Exit at the opposite band.
To Import 1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
December 6th, 2010
Size: 11.32 KB
Downloaded: 594 times
755
forexfelix
I tripped over this indicator and it's from Ninja Trader Support Forum. For me, it's a great learning tool before I can draw trend lines myself .. smile ..
December 5th, 2010
Size: 5.99 KB
Downloaded: 248 times
752
wgreenie
This indicator plots a 2 colored line representing the average volume over a period of bars. Simple as that...I was asked about the way I use volume to evaluate my entries and so I uploaded this indicator to assist in answering question. I won't answer that question here but just provide the indicator.
November 19th, 2010
Size: 7.77 KB
Downloaded: 167 times
735
MWinfrey
NewsAlerts is a helper indicator in that you must find out the news items for the day and configure the indicator with those news items. I use jtEconNews2a configured so it alerts me. However, I find that I forget about the news. So, I wrote this indicator to display a message prior to the news item and leaving the message on the price panel so I don' t forget about it. You can add the news items each morning before you start trading and they will clear after the news item expires. You can configure 3 news items. So, if there are several news items at the same time, just configure one item. That about covers it. I hope you find it as useful as I do.
November 18th, 2010
Size: 3.02 KB
Downloaded: 136 times
732
MWinfrey
Exported using NT6.5.1000.9
This is a MOD of the SMARSI indicator that will plot RSI dots on a SMA when RSI is above/below the alert level.
The basic indicator has four inputs: the SMA setting (default is 21 period), the RSI setting (21 period), and the upper and lower level alerts (set at 43 and 57).
The MOD on this indicator is the addition of BLACK background dots behind the RED or GREEN dots when the RSI condition is TRUE (showing market pressure) AND Stochastics has made a pullback in the opposite direction.
The appearence of the BLACK background dots will alert to a pullback in a trend OR the end of a trend.
The Stochastic used in this indicator is the Double Stochastic Mod. The default setting for the Period is 10 and the EMA is set to 2. These settings are designed to catch fast pullbacks.
In addition to these settings are the upper and lower level ALERTS (default settings are 20 and 80).
All settings can be changed in the Parameters section.
The RSI 'dots' will only print when the SMA is Rising/Falling in the same direction as the trend (borrowed from jabeztrading's MOD).
V2 Edit The only change is in the parameters section, now the inputs are coded in order.
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
November 16th, 2010
Size: 11.06 KB
Downloaded: 433 times
730
TraderAZ
Exported via Ninjatrader 6.5 (lastest update)
I made an addition to the SMARSI indicator that was submitted on Nov 7th by TraderAZ.
I've added another RSI (default period 2) that when it reaches OS/OB extremes, in accordance with the slope of the moving average, a dot (bigger one) is plotted on the moving average.
So in addition to the four user defined inputs as in the original indicator, there are inputs for the second RSI and upper and lower levels for that RSI.
Original Keltner Channel with Multicoloured Midband according it's slope.
Simple Strategy:
Buy when midband is green (uptrend), and the price exits from channel downside and reenter.
Exit at the opposite band.
Sell when midband is red (downtrend), and the price exits from channel upside and reenter.
Exit at the opposite band.
To Import 1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
October 16th, 2010
Size: 4.05 KB
Downloaded: 186 times
680
MWinfrey
I downloaded the base version of Ichimoku from the NinjaTrader Support Forum, and left all commenting within untouched except for what I added. I only added support for background colors displayed when both the Kijun and Tenkan lines are both above or below the "cloud". When either line are within the cloud, the default background color is displayed which indicates neutral. The settings are self explanitory.
I use this setup on several different time frame charts to tell at a glance whether a bearish, bullish or neutral condition exists on various time frames. With this tool, I can make those charts very small, and I don't need to spend any time studying the charts to determine those conditions because the bg color tells me instantly what is happening.
Note, there are interesting comments within the code that gives info on how to find more complete instructions for trading ichimoku, which I'm still learning about.
October 16th, 2010
Size: 8.64 KB
Downloaded: 205 times
679
glennw
Pull backs are often hard to see. I find that combining the AaDszlDszl with this indicator helps flush them out.
Version 6.5.0. This indicator is nothing more than three seperate CCI's on one chart with some pretty colors (I like colors). The colors for the background flooding and lines as well as intensity are selectable/deselectable. I try to reduce clutter on my screen as much as possible so the name only displays what I think is the important information.
I circled eight pull backs on the AaTripleCCI whereas the AaDszlDszl only identified four. What I am looking for is the yellow line (the Fast CCI) to move above/below the zero line and return while the blue line (the Slow CCI) stays on the original side.
October 12th, 2010
Size: 6.61 KB
Downloaded: 450 times
670
gordo
This is the zip file for the NT 6.5 release. For the NT 7.0 Beta 22 realase, click here.
Version 6.5.0
This is adaptation of my Double DSZL indicator (NT 6.5 or NT 7.0). I really like the patterns this indicator makes. When all three Dszl's are overlapping, I use that as a sign that the price is moving in that direction. When one indicator moves from high to low (or vice-versa) it's a pretty good sign of a pull back. The patterns are very repeatable and help me a lot to read price action.
I use this in combination with my AaTripleCCI indicator (NT 6.5 or NT 7.0).
September 23rd, 2010
Size: 4.35 KB
Downloaded: 528 times
638
PiCoTrader
The Scalper indicator uploaded by alrhai repaints. In order words, The indicator identify reversal bar with future bars. I modified Scalper to Scalper_RT. The new Scalper_RT has the same logic as the old one for identifying reversal bar, but disable repaint function, and draw arrow in real-time.
August 18th, 2010
Size: 36.29 KB
Downloaded: 437 times
607
baruchs
This is the same indicator as found in the NT 7 downloads, but in NT 6.5 Zip format. For the NT 7 download go to this link.
Version 7.1
This is one of my favorite indicators. We call it the 'Double Diesel'. It is two double stochastic zero lags running on the same indicator. When both lines cross through the high or low bars (selectable values) the background floods. When only one passes through, the background floods blue.
One of our favorite features with this indicator is when the fast DSZL moves down/up and back while the slow DSZL does not. This is a sure signal of a pull back. We call it the 'Jersey Pullback'. You can see one on the attached screenshot at 10:19.
Version 7.2
I got so many nice compliments on this indicator and it seems to be very popular, so I enhanced it and made it NT6.5 compatible. I put the NT6.5 version here.
This update allows the user to select the back ground colors and intensities for up or down movements.
August 6th, 2010
Size: 3.92 KB
Downloaded: 154 times
589
Jeff Castille
This Macd can let you apply 4 kind of MA(SMA, EMA, HMA, WMA). You can specify each line's MA method. Also there is the threshold yellow line by which you can identify side way of market. If histogram bar doesn't break yellow line for a while, the market goes into the side way. This indicator works on NinjaTrader6.5 and NinjaTrader7.
August 5th, 2010
Size: 9.24 KB
Downloaded: 184 times
585
51friend
Plots the MACD, RSI, or Stochastics and automatically draws a line representing the current trend and generates an alert if the trend line is broken. Based on the Automatic Trend Line Detection indicator by NinjaTrader_Ray.
With the help of mrLogik at purelogiktrading.com, the attached iADX turns magenta when the ADX is above the 50 threshold. (I use a very short setting of 5 for daytrading/scalping.) The parameters for the threshold and colors can be changed in the indicator window. Red histogram bars for downtrend, blue histogram bars for uptrend.
calculates the range of fast and slow moving but need to normalize it so it runs in the range from 0-100 like an rsi - was done on meta but dont know how to do it for ninja- any help will be great
Graphs ATR (green line) and the size of the corresponding bar in yellow ( |High-Low| ). Can be useful in determining if a signal bar of large enough to take by visualizing it's size relative to ATR. Was introduced here.
This indicator allows a user to draw a horizontal line on their chart and have an audio alert wav file sound when the line is pierced (either from above or from below).
I didn't originate this indicator. It is a modification of NT's native price alert indicator, NT's original indicator only gives you an alert in a their alert window which I found not so helpful.
With the help of others here at BMT, I modified this indicator to include the ability to type in audio wav files in the indicator settings so you would get an audio alert when the hand drawn horizontal line is breached.
Things you should know:
You will need to insert 2 of these indicators into your chart indicator list.
On one choose "true" in the "uptrend/downtrend drop down box at the top. In the 2nd one, chose "false".
You will want to choose false for "calculate on bar close" on both indicators
For audio files, type in the name of an audio file you know exists in your program files/ninja 6.5/ sounds folder.
May 12th, 2010
Size: 6.33 KB
Downloaded: 412 times
447
zacharydw00
This indicator plots the difference between 2 moving averages as a multicolored plot. The zero line is actually the slower of the 2 moving averages. You can select from 6 different moving averages. The screenshot shows the combination of EMA and SMA. So, you can pick your poison.
The multicolored plot is the difference between the slow and fast moving averages. Lime indicates the plot is rising, red is falling, and yellow is flat.
The dots on the zero line tell you the plot is above or below the zero line.
The histogram tells you the slower moving average is rising or falling.
Written by Mike Winfrey, aka Joe Blow, don't remember when I wrote the first iteration. However, this one, Version 1, was completed on May 11, 2010.
Exported 6.5.1000.15
Haven't done anything with NT7 yet. Not worth the effort yet.
Just a note...send a PM to me if you have questions or comments. I won't be notified if you leave a comment here with the indicator and as a result you may never get an answer.
This is a simple modification of NT's Swing indicator. This ind. does Not fill in the bars between the bar of the High/Low point and the bar on which it was detected (as specified by the Strength input). The purpose is so you can quickly see which bar the Hi/Lo point was detected on(signal was given).
This one is almost the same as BalanceLine but it uses H+L/2 of total number of days back not just 2 at a time. If you don't see it plots try to increase number of download days or reduce number of days back, the default setting is 5 days back.
-4/30/10
add on/off switch to turn off the drawing in case it is plotted too far away from prices making a chart hard to read or you just don't want to plot it.
-5/02/10
just a re-upload v2 for some reason the name v2 won't show up. if the name V2 doesn't show in your indicator list just unzip the file and compile the BalanceLineV2.cs file directly from your editor.
This is a slight modification to the original MACD BB Lines indicator.
The defaults are the same.
The changes I made were:
Increase the dot size
Swapped the upper band and lower band colors (upper is now blue & lower is red), Removed the white "background" dot that was displaying behind the MACDBBLine dot.
UPDATED APRIL 10, 2010 - ADDED A "MID-LINE" between the upper BBband and lower BBband
This works in NT6.5
This has not been tested in NT7.0
Iīve found this indicator in my TOS platform and translated to NT. It also has a LinReg option (set to true by default) to make it smoother, but it also works grate with out it... Iīve foud it grate to confirm mayor swings... look at the chart and good trading...
Ehlers Distant Coefficient Filter
vorol
This is an enhancement of SMI4 (which was an enhancement / combination of the SMI2 and Cory's SMI2) which added a price bar coloring option, a background coloring option, an option to draw a vertical line on the price panel when trend changes and an option to play a sound upon the formation of a new price bar).
Cory contributed code to color the region between +20 / -20 which indicates a possible chop zone.
The background coloring differs from SMI4, which painted the background based on whether the SMIEMA was above or below the zero line.
This version changes the background color when the SMIUP / SMIDOWN dots rise or fall above the SMIEMA line, indicating a possible change in price direction, for potential earlier entry into the move.
Examples of how I use this indicator can be found in the WizardsDen (HolyGrail II) thread.
March 23, 2010: Update
REPAINTING:
Fixed a "repainting" problem that other members discovered. Cleaned up the code. Changed the text that read "very over bought / very over sold" to "chop zone upper" & "chop zone lower". Removed the ChopFilter function, as it added nothing to help in keeping you out of chop.
ADDED TEXT ALERTS:
"POSSIBLE CHOP" when SMI dot enters the +20 / -20 zone
"LONG BREAKOUT" when SMI dot exits above the +20 zone
"SHORT BREAKOUT" when SMI dot exits below the -20 zone
(Re-uploaded March 23, 2010, 7:29 pm CST. Original post did not contain the .zip file, just the .jpg file)
May 17th UPDATE:
This fix addresses several problems that were discovered.
Mindset contributed code to color the bars hollow when price is rising & solid when price is falling eDanny contributed code to remove errant arrows, vertical lines, text messages and also code to clean up the conditions when the warning sounds play.
The arrow code has been changed to (offset*ticksize) so that when you use it on currencies, you shouldn't have to adjust the OFFSET parameter in order to get the arrows to show. They should show automatically now.
I changed it so that it colors the arrows to whatever color you set in the VERTICAL LINE UP/DOWN option. That way, you can have Red/Blue price bars & Magenta / Lime arrows (they are a little easier to spot, I think, when they're not the same color as the price bars).
March 23rd, 2010
Size: 11.30 KB
Downloaded: 4702 times
393
TheWizard
I enhanced Cory's SMI2 and added a price bar coloring option, as well as background coloring option and the option to draw a vertical line on the price panel when trend changes. You can also put this indicator in panel 1 and turn off all the plots (Set all plots & alert line to TRANSPARENT) and just using the background colors to color the background of the price panel, if you desire. I altered the default settings and some of the plots so that it now looks more like the Eco2 (Ergodic) indicator, and is (I think) a little easier to read than Eco2.
March 23, 2010: Update
REPAINTING:
Fixed a "repainting" problem that other members discovered. Cleaned up the code. Changed the text that read "very over bought / very over sold" to "chop zone upper" & "chop zone lower". Removed the ChopFilter function, as it added nothing to help in keeping you out of chop.
ADDED TEXT ALERTS:
"POSSIBLE CHOP" when SMI dot enters the +20 / -20 zone
"LONG BREAKOUT" when SMI dot exits above the +20 zone
"SHORT BREAKOUT" when SMI dot exits below the -20 zone
Guys, I'm posting this here because I find it to be an absolutely fantastic pivot indicator. this is the version for Ninja 6.5.
Exported using NT Version 6.5.1000.14, will not run on NT 7
Give all credit and thanks (and questions) to Harry on the Ninja Trader Forum, I've been using these for quite some time and they are brilliant.
The download file reads SessionPivotsV5b, because is it automatically renamed by the forum software, inside you will find version 8.4
Family of Indicators for display of current day, week, and month OHLC, daily, weekly and monthly pivots.
Version 8.4 includes Fibonacci Pivots
Includes a number of options such as floor pivots, Fibonacci pivots, Camarilla pivots, Woodies pivots, VWAP of prior session and midpivots. The indicators work on fixed period, tick, volume and range charts.
Right side chart margin: Please set the right side margin under chart properties to at least 100 to allow for correct display of labels.
DailyBars mode: Quick and easy solution. If supported by your data supplier you may get the settlement price instead of the close. Sessions are only needed for locating lines horizontally. In Dailybars mode you will usually get full session pivots.
CalcFromIntradayData mode: More options, but pivots will be false, if you select the wrong session for the chart. In CalcFromIntradayData mode,
session end time under chart properties should be ideally identical with session end time chosen for the indicator (to compare convert session end time of indicator to PC clock time).
Session times: Pivots can be calculated from daily bars or from intraday data. In both modes enter session times via indicator panel to allow for correct display. For predefined markets enter session times in the timezone of the exchange, for all other markets set indicator to local mode and enter session times in the timezone of your PC clock. For predefined markets adjustment for daylight saving time will be automatic, in local mode you have to do this manually.
Supported markets: CME (ES, EMD, NQ, YM, ZB, ZN, ZF, ZT, 6A, 6B, 6C, 6E, 6J, 6S, ZC, ZL, ZM, ZS, ZW), NYMEX(CL, QM, HO, RB, NG. GC, SI, HG), NYBOT (TF, CC. CT, KC, SB) EUREX (FDAX, FESX, FGBL, FGBM), IPE (COIL, GOIL) and FOREX. For all other markets and instrument the indicator will only work in local mode.
Intraday sessions: For some special applications (Pivots based on night session, opening hour or any intraday session) you may haveto set IntradaySession mode to true to avoid 24 hour delay of display in some cases.
Example how to use: ES futures
(1) In CalcFromIntradayData mode it is recommended to set the session times under chart properties first. The session times needs to be entered in time of your PC clock. So if your PC clock is Eastern Time (New York) you would enter session begin = 4:30 PM, session end = 4:15 PM. Pivots will be accurate, if you enter session times here. For "DailyBars" and "UserDefinedValues" mode this is not required.
(2) For full session pivots (ETH) you will now enter the session times via indicator panel. This is (for CME you have to use Central Time) session begin: 3:30 PM, session end 3:15 PM, session break: 15 minutes. Full session pivots can be calculated from both daily data or intraday data. Some data suppliers use the settlement price for daily data, so you would get based pivots based on the settlement price in "DailyBars" mode.
(3) For day session pivots (RTH) you need to select "CalcFromIntradayData" mode and enter session begin: 8:30 AM, session end 3:15 PM and session break: 15 minutes.
This indicator will show the # of ticks in the last x seconds. At key turning points, professionals will start scaling in and/or reversing. This will cause an increase in the activity in terms of the number of ticks.
When you get a peak, the reversal has probably already occurred, so this is used more to tell you to expect a reversal then it is to time the reversal itself.
Also keep in mind that in a strong move, professionals will scale out of their positions and may have to reverse two or more times (in effect averaging down). This is normal so keep in mind that the signals can be early. If price doesn't react to a signal, expect a another attempt by the pro's. If price doesn't react to the second attempt then the move is very strong.
It only works with tick charts. The lower the tick size the more accurate.
See this blog post for more information including a short video & annotated chart.
History:
20100318 1.0.3
Added paintbar
20100317 1.0.2
Added audio alert
Uses Richard's algorithm which is much more efficient
20100315 1.0.1
Added threshold
Fixed bug where period was hard coded
March 15th, 2010
Size: 2.64 KB
Downloaded: 3654 times
376
cunparis
This bband has 2 stddev value so that it can color the outer band and it highlights the band if price touch the band and it also do the alert if touch.
Exported with Version 6.5. I do not have Version 7 (I don't want to be a pioneer. A pioneer is a guy who ends up in a ditch with arrows in his back).
This is a Range Bar Hi/Lo Predictor (RangeBarPredictor) and a Price Panel (PricePanel) with the Hi/Lo numbers as well as price for the current bar and the previous bar with an option to show the angle of the EMA(34). This was requested by steve2222 in the Wizard II thread.
To insert the PricePanel into a NinjaTrader chart; click on Properties, click on Right Side Margins and change it to 140. Insert PricePanel, it will show up in the expanded right hand margin. There are some adjustments that allow you to change the vertical location of the data.
The panel shows,countdown timer to bar completion in Ticks, Number of Ticks to closest bar end( Green for ticks to High and red for Ticks to Low) current price, Hi/Lo of current bar, Projected HI/Lo of current bar, previous bar close , previous bar Hi/Lo and the angle of the EMA(34).
This panel has been around on NinjaTrader for a long time in various versions with code written by way to many people to give credit to everyone who contributed. I am NOT a programmer, please have a professional review this code before using to trade real money.
Insert the RangeBarPredictor in the panel with the price bars. A down arrow will show the predicted high start of the next bar and an up arrow will show the predicted low start of the next bar. You have an option to change the colors of the arrows. Various versions of this indicator have been posted on NinjaTrader over the years.
Compatability
NT 7 has the following Code Break Error :ChartControl.SessionBegin.TimeOfDay == ChartControl.SessionEnd.TimeOfDay - ZTrade101
This indicator simply plots the EMA High Low and Close for a single time period which creates a ribbon or wave look from the 3 lines. Can be useful for potential support and resistance areas. Instead of adding 3 individual EMA's to the chart, with this indicator you can change all three plots with the single time period. You can also hide the plots without removing the indicator from the chart.
COMPATIBILITY:
NinjaTrader 6.5: Created with 6.5.1000.12
NinjaTrader 7.0: NOT TESTED
In an attempt to collect Indicators from Treads, Big Mike has asked me to post the Most popular indicators here. I have credited the Author, to allow editing or deletion. ZTrade101.
March 6th, 2010
Size: 7.00 KB
Downloaded: 219 times
358
roonius
Everybofy who is interested in Volume Spread analysis should use this Script. It is great for learning purposes and as tool for trading.
The Original Code is from Karthik who wrote the code for Amibroker: Here you can find the Original code: http://www.vpanalysis.blogspot.com/. He has also an excellent primer on VSA. If you can't get anymore shoot me a PM with your Email.
All types of VSA signals are coded with a paintbar: Red Square - UpThrust bar. Blue Diamond - Reversal possible, yesterday was high volume wide spread up bar, but today we reached 10 days high with low close wide spread down bar. Red Triangle Down - UpThrust confirmation. Lime Square - Strength bar (either strength is showing in down trend or a supply test in up trend). Yellow Triangle Up - An Upbar closing near High after a Test confirms strength. Lime Diamond - Stopping volume. Normally indicates end of bearishness is nearing /OR/ No supply. Lime Triangle Up - The previous bar saw strength coming back, This upbar confirms strength. Blue Square - Psuedo UpThrust, A Sign of Weakness /OR/ A High Volume Up Bar closing down in a uptrend shows Distribution /OR/ No Demand. Blue Triangle Down - A Down Bar closing down after a Pseudo Upthrust confirms weakness. Yellow Triangle Down - High volume Downbar after an upmove on high volume indicates weakness. Aqua Triangle Up - High volume upbar closing on the high indicates strength (in short term down trend). Deep Pink Square - Test for supply. Turquoise Diamond - Effort to Rise. Bullish sign. Yellow Diamond - Effort to Fall. Bearish sign.
Within the chart there are three information boxes, that even give you information to the signals (great for learning), suggestion what to look for next, information for the spread, volume and trend.
Based on my needs, I have added couple new features to some of Gomi's indicators. The 2 new indicators are meant as add-ons (not replacements) to the original ones contained in the current GomPackage1.1.
GomDeltaVol_UpDown (based on GomDeltaVolume):
added option for "negative delta"plot below zero line; added "zero line" plot; disabled TotalVolume plot/calc.
This indicator draws a horizontal line on the price panel showing where price is currently.
I found this in a post awhile back and am currently using it on a chart. When I looked for it in the DOWNLOADS section, I could not find it, so am posting it for other interested members.
I added a new bar sound (sound that you can turn on / off to
alert you to the formation of a new price bar - I find this helpful, as I am not
always facing my monitor & like to hear when a new price bar forms), background colors (blue for long / red for short), which you can also turn on or
off & change to suit your preference. Hollow Candelstick Bars (some folks have requested this CandleStick type. OHLC and HI/Lo will still show solid.
Other than that, it works just the same as the original ADXVMA Alerts V1.05.
Lifted from the BetterVolume2 Indicator available on the Ninja Forum and originally written by Barry Taylor and available for free, this one features a few additions including:
some of Cory's volume stop work;
some additional patterns (many of them experimental) which track various combination such as down bar, then churn, then up bar. Small-size wingdings are used to highlight such signals which can easily be turned off once they are learned and/or different ones added.
This is not nearly as sophisticated as many of the live-updating buysell/delta indies out there. The Tradestation version of BetterVolume does a good job of reading up and down ticks but this is much tricker in Ninja and this indicator was not programmed that way (though at this point I think it could/should be) with less difficulty than a year or so ago since more independent programmers out there have shared so much stuff.
To activate the volume signals, change the MA Period from 20 to 21. Then read through the Descriptions for the other options. It's fairly straightforward.
The attached pic shows two version of BetterVolume2 which I had up to ensure this latest version with a different name (so as not to over-write the original BetterVolume2 on others computers) was working correctly.
This is a modified version of an existing indicator for which I've been unable to uncover the original programmer.
As best I can interpret the code, it paints UpBars/DownBars based on whether the current Median Price is greater than or less than the Median Price of the last six bars.
It also uses two additional colors to mark where the Up/Down trend is fading, which is based on comparing the LinRegSlope of the last 3 bars rising/falling.
The Neutral Bar is colored when the current bar Median Price is equal to the Median Price of the last six bars.
My modification only added the "Hollow Candle" effect to Up closing bars. I did not change any of the Trend decision making program logic.
Changed the code to paint rising price bars hollow & falling bars solid. Neutral bars are hollow, but colored according to the Neutral Color you select in the indicator preferences panel.
COMPATIBILITY:
NinjaTrader6.5: Yes
NinjaTrader7: No - ZTrade101
Updated version of the original indicator posted by Cunparis. Same logic. I found that the colors were not serialized and if you changed any of the bar colors upon saving the template & re-loading, they reverted back to the original default colors. I added serialization to the indicator code so that if you decide to change the default colors, once you save your template, the color changes will be saved also.
This is a very interesting indicator that shows historical volatility for the current time fo day, averaged over a selected number of previous days. It tracks surprisingly well with ADX, except that it actually leads ADX in many cases. The screenshot shows how the two compare.
This could be very useful in strategies because you could actually look forward and see the expected volatility ahead of time.
A nice future addition to this indicator would be an option to shift it forward a few bars, so you could be aware of the predicted volatility before it gets there.
This is a realtime indicator that measures money flow by the individual tick. Not related to NYSE TICK. It does a decent job of showing which swings are real moves with volume behind them and which are just retracements.
Triple Exponential Moving Average with the angular slope calculated for each Bar.
Display of angle maybe turned on/ off in Dialogue Box.
I have calculated the slope using only the values at the current and last Bars, not the Current Bar and the average of the last 2 bars as many indicators do.
Here is poor man's version of Market Profile. I saw it in the Ninja Trader support forum and thought might be helpful for people who like to see the market profile chart without paying for it. You need to open an intra-day chart (like a 5 minute chart) and then add the indicator. There are settings for begin and end of day session, and display options for just (POC, VAH, VAL) or TPO, etc.
On monday, on some futures like CAC40, DAX, pivots are not correct with Zenfire data provider. This indicator solves this problem.
(the code is based on the original Ninjatrader one).
Version:
20100118: V1
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
Just an indicator to place support/resistance zones on a chart. 10 zones are available. Would like to be able to make the zones color selectable, but I'm not a programmer, just a "copy and paster" . These work better than rectangles because you can't mistakenly grab them and move them.
Noticed when writing my trading journal (so glad I found this forum, thanks Mike, and all those I've learned from) I was constantly noting the DOM. So, decided to have an indicator that visualized it.
This is ladder based on jtRealStats code (NT downloads) and looks at the ending cumulative volume of bids and asks for each bar. In the code I limited the idx to the 5 levels above and below. Previous postings have noted that a equally-weighted and heavy DOM is one sign of Barb Wire (AL Brooks). Thus, a vaccum for your trading $$$.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO (sam028)
Double stochastic is used as a cycle indicator. You can use a long term and short term cycles on your chart and take oversold short term trades in the direction of the long term cycle. This is not holy grail!
This indicator is from the Ninja Trader Support Forum.
This is the first version of a real-time indicator based on Buying and Selling pressure using a line to visualize the data. It is modified from jtRealStats and BuySellPressure. Works for NinjaTrader 6.5, and a related version was tested on Ninja 7. Gotta leave NT running all the time now or the data is lost. Chaging any other indicator erases it. Maybe for NinjaTrader 7 it will be able to use Historical data.
This is the first version that uses a line rather than bars. I suggest overlaying it with Volumn (not shown in my tick charts), as bars. Blue represents buying and Red Selling based on the price vs. the last bar. An example is shown below where it is used in conjuction with ADXVMA_sharky_paint & Bill Williams' Acceleration/Deceleration Oscillator (from NinjaTrader).
In the attached figure there is a buying climax that preceeds the Failure of a Al Brooks described (Chapter 2) micro trendline BreakUp and the maximum of the DOM for the morning. This is confirmed by a decrease in the Williams Acceleration Oscillator. All indicating that this rally has run its course.
THIS IS A INDICATOR THAT WILL GIVE YOU AN OPEN RANGE BREAKOUT ZONE YOU CAN SET IT TO ANY TIME YOU LIKE FOR YOU'R RANGE LIKE 30 MIN,15 MIN 2HRS ECT ECT...I THINK IT BEST TO SET IT LIKE 30 MIN OR 15 MIN <SAY THE MARKET OPENS AT 700AM SO SET IT FOR 630 OPEN-701 CLOSE THAT WILL GIVE YOU A 30 MIN RANGE> THEN ENTER YOUR TRADE WHEN YOU BREAK TO THE TOP OR BOTTEM OF THE BLACK LINES USING YOUR OTHER INDICATORS OF CORSE THANKS AND HAVE FUN...SHARKY
THANKS TO RICHARD AND ZELLER FOR THE HELP
This was originally posted by ElliottWave. I'm just adding it here as there have been many requests.
ZiNonLagma is very similar to the StepMA indicator. Personally, I like it better as it seems more responsive and is easier to customize.
In the screen shot, I've set the line style to "hash" and the line width to "90". The reasons for these settings is to hide price noise that occurs behind the hash bars. I want it hidden because I'm only looking for "committed moves" by the market. Of course, you can use it as you wish.
I've been trying to add an "opacity" feature to the plotting but it's beyond my skills. Maybe someone wants to take a crack at adding that feature.
DeanV on the NT forum recently posted this new edition which features ability to plot dynamic PVP, i.e. it shows when the PVP/POC 'flipped' during any session. Works live but also on historical charts which is a godsend for review work.
Attached pic has a few extra things on it, but the dynamic PVP is the red hash plot. (The magenta bands are from the new hVWAP and are different from the dValueArea indicator. Also there are other bands there that are different too.)
Note: my version in the chart has some different colors from the one uploaded which is the original from Deanv.
A recent modification of the VWAP that allows you to save start and end times in templates, plus has multipliers for the SD bands and a couple of other features.
Picture shows a few other things, but the new hVWAP is the thick Magenta line and its SD bands are in similar color.
This is ZigZag UTC with trend lines and fib tools. It counts number of bars of each swing. It also shows bar count in progress and fib retracement in progress.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO(Tested by sam028)
Submitted by tastudios on NT. I was looking for this indicator and thought it might be useful with Gomi's stuff.
Plots the price at which highest number of contracts or shares were traded at any given time. It is also the maximum point on a volume profile. The PVP resets at the start of every new session.
The VHF indicator can be a useful tool as it attempts to measure the trendiness of a market. It reveals the strength of a trend, not the trend direction. This filter compares the sum of one-day price changes within a specific time period to the range between the high and low prices over the specified period. The VHF values help identify whether prices are in a trending phase as well as the degree or strength of a trend, where the trader should use trend-following indicators, or if the prices are in a trading range market, a case where congestion-phase indicators (such as
oscillators which work well in trading range markets) should be used.
In theory, the VHF indicator can be used in the following three ways:
1. In determining whether a particular market condition is trending or is in a congestion/non-trending phase: A rising VHF line indicates a developing trend; a falling VHF line indicates prices may be entering a trading range market.
2. To determine the degree or strength of a trend: The higher the VHF line, the higher the degree of trending. A falling line indicates a trend is weak.
3. The use of the VHF as a contrarian indicator: Relatively low VHF values can indicate that prices can be expected to break out of the congestion phase and start trending. On the other hand, relatively high VHF values indicate that a trending phase may be coming to a close and that the market is getting ready to enter a congestion phase.
This is an indicator that I have found on ninjatrader support website , I though it would be a good add-on to BMT collection
Combination of RSI and ATR .
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
In this case, there is a third longer term line 3* the usual 2nd line (Kijun). Why? Because it will line up with a longer term chart 3* higher (i.e. trading chart 150 ticks, LT 450 ticks, or 5 and 15 mins).
Also because the longer term line will often line up exactly with the Clouds that are drawn 27 bars ahead based on current action. The LT Clouds are drawn 81 bars ahead and are the equivalent to the Clouds in the LT chart. This way you don't really need the LT chart but also you see the relationship of shorter and longer term cycles/trends on the same screen which is helpful.
The Ichi3Lines indicator has (too) many bells and whistles such as a Bollinger 'tunnel', triangles that show simple pattern pullbacks within an Ichi trend. But it also has aspects of the official method not available in other indicators such as:
Circles plotted when the Clouds (Senkou Spans) cross up or down, and in my case with slightly different colors so you know immediately whether it's a long term cross or short term cross (these are happening off the screen in the 'future').
There is also a diamond plotted along with an optional line when there is a 'Chikou' cross, which is the current price crossing above or below the Chikou line which is plotted 27 bars in the past. This line is not on the chart because when viewing an historical chart it is very messy. In actual trading that line is in the past and is fine.
There are arrows indicating the basic 9-27 cross (tenkan-kijun).
There are pink arrows indicating when the longer term Kijun (KijunLT) which I have added (darker green plot) crosses above or below the cloud plot. These are strong confirmations of a strong trend indicating longer term breakouts.
There are also many back color options which only work on lighter screens so this picture with black background does not show them.
On this picture, to reduce screen noise, I also did not plot the basic Tenkan and Kijuns (sacriledge!) and only plotted the Kijun LT (dark green dash line) and my own 'equilibrium line' (pink dotted line) which is the average of the Tenkan(9), Kijun(27) and KijunLT (81) medians, the idea being that this is the current equilibrium price. It is around this price that the oscillator is built.
The oscillator: in addition, there is an Ichi 'Squeeze' Oscillator which is quite good but which unfortunately has a small glitch in that sometimes the lines don't plot and I can't figure out why. Also, it seems to happen only with minute bars. They used to work and now they don't and I must have changed something at some point and now can't find out what.
It is designed to help in identifying the longer and shorter term trends together, when they are lined up or not, but also has a faster line (Combo) that is pretty effective at showing extreme OB and OS conditions. There are three lines in the usual 0, OB and OS areas which display the ST, Medium Term and LT slopes of the Tenkan(9), Kijun(27) and KijunLT(81) medians respectively. There are also thicker lines above and below which show when all three trends are lined up.
The oscillator bars plot green when the Tenkan and Kijun slopes are not in agreement, i.e. often during consolidation or retracement zones and indicate caution/indecision. Also excellent for possible pullback/retracement entries in direction of overall trend which has not yet changed but is being challenged.
So for those who like the Ichimoku approach or those who wish to study it, this will prove helpful.
Best to disable most of the bells and whistles such as the Bollingers, pullback arrows and triangles and just work with the lines, Chikou span crosses (diamonds on close), Senkou Span crosses (cloud crosses that are in the clouds indicator and always plot), and the main signal arrows.
Oh. there is also an extreme OB/OS plot (pink diamonds) when the price has moved unusually far from the Kijun (middle green line) based on ATR and that distance. They are quite effective at indicating when a market has got ahead of itself.
Also, you can select paintbars, including divergence. The divergence colors are hard coded as red (in bull mkts) and magenta (in bears) so for those who have red down bars this won't be very helpful!
For trend trading, Ichis are truly superior. If you have a bearish cross or situation and the price has gone beneath both the ST and LT clouds, something which you will have been watching develop for quite some time because the clouds are drawn ahead of time, there is a strong probability of a sustained trend for a while. Similarly, early pullbacks in that situation often present low risk shorting opportunities, especially if the price retraces to the cloud bottom(s) and stops and especially if they are long, flat bottoms, indicating there was a long period of congestion at equilibrium and that value area is now about to change as all the action that was needed to happen there is past, or new perceptions have entered the market valuation matrix.
If anyone can fix the glitch in the Squeeze, I'd be grateful!
Note on Colors: apart from the fact that most were designed on white backgrounds whereas now I am going back to black, a note on the trend colors. I use what could be called a daoist system of colors which might be confusing: bullish colors are light and rising, bearish colors are darker and heavier so falling, so in my case I use golds and yellows for bullish (lighter, brighter) and blues for bearish (like water, heavier). Reds and Greens are neutral usually used for basic bars, longer term indicators, though often red is for some sort of extreme. For people used to red = bearish blue = bullish this can be confusing.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO (tested by sam028)
This is the same as Cory's "VolumeStopv3" but it allows you to choose which of 4 types of price/volume patterns will be indicated on the chart. In Cory's original version the 3 types of volume expansion patterns are bundled into one.
This is a simple indicator which shows the various pivot levels: Pivot Point, S1, S2, S3, R1, R2, R3. It works only on a 24hour chart. You must choose your session open and session close. At present it will not work for overnight sessions. I will probably make a new one for overnight sessions as I am interested in this myself, but for now it won't work with overnight sessions.
There are pivot indicators available on the Ninja forum but the ones I found there were either overly complicated or they didn't keep the lines on the historical charts, only on the present day.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
This is a slightly improved ADX indicator which colors the indicator different colors for above & below a threshold. This makes it easy to see if the ADX is above a threshold. I use it to stop trading when price isn't trending.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
SuperTrend uses ATR (average true range) to identify when the trend has changed direction. You can combine this with multiple moving average types to smooth the averages, and you are left with a super effective indicator that can be used to:
- Used to paint bars
- Used to show stop/reverse lines
This indicator is a real-time indicator and does not plot against historical data. A histogram splitting volume between trades at higher or equal to the high of the last bar or lower or equal to the low of the last bar is plotted.
It is currently executed using Chart Trader under the Advanced Trade Management system on Ninja Trader. The goal is to write a strategy using these indicators and back test it. The one think I do not know how to do is how to pass the 2 variables generated by this indicator to a strategy.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
NOTE: Updated 3/11/2010 -- There were a few issues with currencies that have been corrected. Also additional text info has been added. See my blog for details and for NT7 version as well. The NT65 version has been updated here.
Another range bar range thingy (great minds work alike )...
This indicator is for range charts only (seems to work on any flavor or range bars too). It will draw a box around the current candle that indicates how much further a bar would have to move before the range is exhausted and new bar begins to paint.
This box is dynamic in that it adjusts in height based on the current size of the candle. In this way it is always indicating the maximum extent possible for the current candle.
It will also highlight this box using colors depending on how close the candle size is the maximum. Optionally, this indicator can also print the high and low price of the box's range just above and below the box itself.
I'll admit this may be more eye candy than anything else but I thought I'd offer it up anyway.
November 8th, 2009
Size: 3.30 KB
Downloaded: 730 times
179
j0hnth0m
You could use this indicator to trade in the direction of the trend after minor pull backs reversal. It could be used in strategies. It is variation of TTM trend indicator.
This indicator plots the maximum high or minimum low of a forming Range Bar. The plots disappear as soon as a new bar forms or the current bar has filled its required range.
Nov 5th: have fixed coding problem so that it will no longer function when you change to other chart formats. Right now is good for Range Bar and RangeAlt. If someone tells me the coding for the RangeNoGap I can add that in.
Especially helpful for non-time-based bar charts (though also good for them too), this indicator shows the Range Per Minute - expressed in ticks. To avoid huge bars during report times, the coding has a simple governor limitation to reduce the display value, but otherwise is accurate. There is also an optional alarm when RPM accelerates. You will probably have to go into the code to put in a sound file that you have in the Ninja/Sounds directory on the main system partition (not in the MyDocuments area).
Code cleaned up, new Scalping indicators and back color options. If the speed is accelerating above the average (default 6) and it's an up bar, a little wingding arrow will appear below the low and keep plotting on subsequent bars until there is a reversal or a new acceleration.
I find I can load it into the same panel as a volume indicator because the values are so low. Meanwhile if you enable price markers, the current RPM in ticks is displayed as text in the bottom right. The backcolors show that often shortly after acceleration there is a new move or climax of current move so it works as a leading indicator in some cases or confirmation of entry possibility in longer pattern setups.
The alarm can be disabled or a different sound file from the Sounds Directory in the Ninja System folders (not My Docs area).
Small, simple indicator but giving simple, factual information not often shown in others.
This is an indicator that looks for higher highs and lower lows. Inspired by John Carter's TTMScalper. Found on the NT forum. It's plotting price action based on higher highs, and lower lows.
If, used on it's own, it will give a lot of false signals, therefore it is recommended to be used in conjunction with other stuff that fits your trading stile and that's confirming your set-up.
Ok this one will plot on today chart only. It is named ORange_OvernightV2 in case you want to keep the V1
you can use it to find ovenight high and low just set end time to zero.
October 19th, 2009
Size: 3.11 KB
Downloaded: 331 times
163
cory
This is my version of two of the volume patterns from the Better Volume indicator from eminiwatch.com. I only use HVC & LV bars in my trading and these were easy to port. The other volume bars (Climax bars) require upticks & downticks which are available historically with Tradestation but not with Ninjatrader.
HVC bars often mark turning points and are usually the result of professional activity.
LV bars are usually amateur activity and the move may not continue.
I have tested this indicator against the better volume indicator on Tradestation and there is zero difference. If you want the Climax bars I encourage you to purchase the Better Volume for Ninjatrader from eminiwatch.
I also plan to add more volume patterns to this indicator such as "No Demand", "Stopping Volume", etc. If anyone would like to contribute please let me know, I have lots of ideas but little time so I could use the help.
For more information on using this indicator and the volume patterns, please see the thread:
10/19 - Fixed a date/time formatting issue with non-"en-US" cultures.
10/29 - A got a lot of requests to provide a background and border so that the candles and other indicators didn't overlay the text. If you would like this version it can be found here: http://www.johnthom.com/2009/10/economic-news-indicator.html
This is an Open Range indicator that starts from the previous day. In the example it run from 161500 the previous day to 930 the next day. It looks busy but I can't think of the way to make it looks better, open for suggestions for v2.
Improvement:
-zones are in square shape.
-set value for buy zone, sell zone separately
-if you set buy zone color to transparent, both buy zone and buy bracket turn transparent.
Note: I set the buy/sell hash line to transparent to show the square zone better, all you have to do is set them to some color.
When having "Calculate on bar close" set to False with ShowObjects = True it will paint the objects correctly as price action moves.
Scenarios:
If price goes above the 200 line area, it will paint a lime object, if price drops below the 200 line, the object will change to a darkblue object.
If price is in the 100 line area, it will paint a maroon object, if price drops below the 100 line area, the object will be removed.
When having "Calculate on bar close" set to False and having ShowObjects set to True it will paint erroneous painted objects. The reason for this is when price action blasts off and the CCI (let's say) hits above the 200 line it will paint the lime object and if price action reverses on the same bar which brings the CCI below the 200 line the object that got painted will stay. I haven't quit figured out how to code that portion of the code.
It's best to have "Calculate on bar close" set to True with ShowObjects = True.
It's best to have "Calculate on bar close" set to False with ShowObjects = False.
This is a fantastic Volume based Trend indicator that i have found to be amazing.
It is i think by far, the best tracking volume indicator, i have seen through the years i have been trading.
I am trying to make a system that is based on the Green and Orange signals of effective volume (not the cyan ones) but i am no programmer so i can't do it .
I added the Zeller shark below as it matches through another avenue the signals i try to attain. As you can see they come pretty close, again as i can;t program i can't even make the _Zeller Shark indicator to fire the proper signals.
Imagine that even with the spikes of Zeller indicator and Effective voume combined
i get a decent autotrading system that keeps loosing money on the "bllody" spikes but makes it back afterwards on the runs.
I always use renko bars in all trading and autosystems i make.
So if anyone can make a system or a plain indicator that we can use from effective volume (green and orange signals) i would be really obliged.
Take care all and all the best.
Thanks Big Mike for an astounding site and effort...
Same SMI2 but this one won't repaint if you use a plot other than Line. If you use line, it will repaint 1 bar back to connect plots (like normal). But if you use something else, like a dot, it won't repaint.
Mike
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
Requested by VIP user. This ADXVMA adds the ability to not re-paint 1 bar back if the plot style is not a line. So if you use Lines, they will repaint to connect the plots (like normal). But if you use something else, like Dots, they will not repaint.
Mike
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
thanks for making vol stop v2 top of the month download here is ver 3 it seems to create nice s/r lines, specify the lenght in the parm section. use it to find turning point, triangle is text book signal, diamond is a more iffy signal, try bracket trade around the signal.
10/29/09
- fix triangle up vol not painted
- fix dot length so the number of dots plotted will be the same as the number you enter
- change a square dot to a round dot
ps. it's 100% safe to overwrite the old indicator
100% no re-paint certified
Most indicators out there run on bars. Lets take a 3-period moving average. You compute it on the Close, the previous Close, and the Close before that. Well, what if you used 3 other values in your average, instead of the last three prices? Like, what if you used the current value of the 2-EMA, 5-EMA, and 8-EMA and computed the average of those instead?
Ehlers uses the 4-RSI as an example application of the Laguerre treatment. Instead of the last 4 Closes, he uses 4 Laguerre values. Using only four values makes the indicator turn quickly, but you can adjust the overall speed of the output via the gamma input to the transform. Pretty neat!
In July, I looked around briefly to see what other Laguerre indicators were out there. Surprisingly, I couldnt find any. I thought that was strange, because all you have to do is plug in the Laguerre values you need and see what happens. I coded up a few, and found the the Ergodic Candle Oscillator looked pretty good Laguerre-ized.
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
I've found that it works like a magnet: if price is below the wvwma and the stoch curls price goes to the evwma - heads up for me to take a trade on the es.
I use range and volume bars. Many times it takes an inordinate amount of time to build a bar but it isn't obvious unless you do some basic math to find out. So, I created this indicator that works on any chart that is not time based. Really if you think about it you don't need this indicator on a time based chart.
It has two parameters. One is used to declare the number of bars you want to use to calculate the average time per bar and is called "Period". The second parameter is called "MaxLevel" which is used to set the level that you consider to be the acceptable level. For example, I base everything on 5 minutes so my "MaxLevel" is set to 5. So, if the average time per bar plot is below the "MaxLevel" line, I consider the market to be moving in an acceptable manner. Anything over the "MaxLevel" line is considered too slow for trading.
That about covers it. Pretty simple stuff.
Good luck and I hope you find it useful. In fact, I'm curious if anyone actually finds it to be useful. Please let me know.
I also created an indicator called jtRealStats_ChartDisplay (also in the zip file) which helps keep the chart sized properly to display the main indicator.
Also, you need to change the right side margin in chart properties from 4 to 24.
This is a collection of various filters by John Ehlers outlined in his excellent books "Rocket Science for Traders" and "Cybernet Analysis for Stocks and Futures"
There is a much better news indicator available that automatically downloads the news items. Please use that one.
I always forget to stand aside for news so I wrote this little indicator to remind me. It draws a vertical line and plays a wav file. You can set up to 10 times, so you can set it for example 10 minutes before the news and 10 minutes after (Time0 & Time1 for the first news alert). This lets you have 10 single news alerts or 5 news items with start and stop alerts. Leave any times you don't need set to 0 and they're ignored.
I have 1 idea for enhancement: Download the day's news releases from the internet automatically. This is at the edge of my Ninjatrader programming ability but if someone is interested in helping I can provide code to download a web page via HTTP. Parsing it is the problem.
Modified code to display Up/Down arrows when the MA line changes color. This indicator is a "Sample MA indicator that allows you to select different MA types."
Extra features(like arrows) are nice to have when you can turn them On/Off.
Plots lines at user defined values. Not sure where I had found this indicator but it comes in handy while placing your own lines on a chart. Lines are totally customizable.
inspire by Better Emini stop volume indicator but I add many changes to eliminate or include some of reversals that the original miss.
here is version 2 with RJay help it also colors the vol bar.
note: it seems works better on 5m or RJay no gap range bar.
The Center Of Gravity Oscillator by John F. Ehlers
Heres an indicator that identifies every major turning point without much lag.
This new oscillator is unique in that it is smoothed and has essentially zero lag. The smoothing enables clear identification of turning points, and the zero lag aspect means action can be taken early in the move. This oscillator is the serendipitous result of my research into adaptive filters. While the filters have not yet produced the results I am seeking, this oscillator has substantial advantages over conventional oscillators used in technical analysis.
This is a package of two of the three indicators that are part of the RMO system. In this package are included the RMO Oscillator and the RMO SwingTrader indicators. HOLIDAY SPECIAL: Adding RMO System Indicator that colors bars and marks system entries and exits. Arrows suggest entries. Diamonds suggest exits. Use at your own risk. Real money not recommended. Enjoy.
ChangeLog
v3.0.1 - Added divide-by-zero fix provided by Max-td and roonius to fix display problem with shorter intervals.
v3.0.0 - I believe all issues are fixed and am also adding Holiday bonus Indicator that marks entries and exits for the system.
v2.0.1 - Fixed bug where charts would not update from real time data for intervals less than 10min on some Instruments (YM).
Exported with 6.5.1000.12
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
Here is the VolumeDirBins and VolumeFrequency, from this TL thread.
These indicators are supposed to show you in which direction de big traders are going.
More details in the TL thread above.
just a scalping tool buy blue sell red in conjunction with your other indicators just a modified linear regression...thanks to zeller for all his help and work on this...sharky
These are the Corona Indicators originally created by John Ehlers.
They are meant to identify cycles in the market and help you determine whether or not the market is currently suitable for trading cycles. They develop the corona at times when the signal is weak or unstable.
For those who are interested, all of them are based on cycle extraction using a DFT variant.
In general, Fourier analysis is not suitable for use on financial timeseries since it is based on the assumption of Stationarity. In the DSP world that restriction is commonly relaxed to include WSS signals (wide sense stationary). Ehlers seeks to approximate a WSS signal by detrending the data with a high pass filter before the DFT step, whether or not that is a suitable approximation is questionable as it ultimately depends on the specific data being processed.
What is certain is that they look very cool, so try them for yourself and see if you find them useful
COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES (tested by sam028)
Description
This is a moving average created by Igorad from the Trend Laboratory and Forex-TSD forums.
It has very low lag when the market is trending and is usually flat when the market is ranging.
Change Log Updates 1.
Changed MA_Mode to only allow SMA or WMA Updates 2.
Allow kV input minimum value to be 0
Allow Percentage input to be positive or negative Updates 3.
No longer BETA.
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
Colored WMA based on slope. version 1.001 Simple but useful.
For example -
To recreate the wave in this picture use a 330WMAColored, 160WMAColored, and 30WMAColored. Then build the wave with standard WMAs from 1wma to 160wma spaced every 6.
here is a fixed version of the dma that mike and sam and peter and sys trader all worked on. now it can be set to 14 zerolag 1 adx for the sharky consolidation plots so have fun and enjoy...sharky
DELETE THE OLD ONE OUT OF YOUR NINJATRADER BEFORE YOU DOWNLOAD THIS ONE!!!!!!!!!!!!!!!!!!
While Gann was purported to be a brilliant trader in any market his techniques have been regarded as complex and difficult to implement.
The great contribution of Murrey Math (T. H. Murrey) was the creation of a system of geometry that can be used to describe market price movements in time. This geometry facilitates the use of Gann's trading techniques.
Combination of the FRAMA and KAMA indicators to achieve a good tradeoff between both, works especially well on range bars. Standard deviation bands are included, to make them invisble please set the input named "Deviation" to 0. Future strategies might look into optimizing the weighting factor between FRAMA and KAMA to fit better for given timeframes and interval lengths.
It provides a overviw of Volume at peaks. So that are possible Turning points. It better works on 5Min, 10Min and Range 6 Charts. Its signals can only be considered when some other indicators are also supporting.It generate signals at Bar Close.
VMA Zones charts an upper and lower region on your chart using the VMA indicator. VMA (Variable Moving Average) adjusts to low volatility and high volatility periods automatically, by using the CMO for calculations.
You can use the VMA Zones as a "Kill Zone" (don't trade inside the zone), or you can use it as a trigger or confirmation when to enter or exit a trade.
You can go long once a full bar has closed above the upper line, and go short once a full bar closes below the lower line.
In the picture, this indicator is the shaded yellow zone on the top panel.
Updated version of ZeroLag MACD with some enhanced visual flare, zero line is colored based on whether the MACD line is above or below the average line and the overall trend is up or down.
Two-in-one bundle: DoubleMA plots two moving averages in one (originally by Rollins, updated by me to add new MA's and a Signal/DMV dataseries).
ChannelThis will put any two moving averages into a channel with various display options so you can look for breakouts or identify Kill Zones.
You should first delete the old ChannelThis, DoubleMA Paint, DoubleMA, and MAV indicators from your indicator list --- in that order --- if you have them. Tools -> Edit NinjaScript.
Linear Regression Channel consists of two parallel lines, equidistant up and down from the line of linear regression trend. The distance between frame of the channel and regression line equals to the value of maximum close price deviation from the regression line.
This indicator can plot a liner regression, a parabolic regression (second-power), and a polynomial regression (third-power).
Description
Combination of the FRAMA and KAMA indicators to achieve a good tradeoff between both, works especially well on range bars. Standard deviation bands are included, to make them invisble please set the input named "Deviation" to 0. Future strategies might look into optimizing the weighting factor between FRAMA and KAMA to fit better for given timeframes and interval lengths.
References
Please take a look at the original FRAMA posting for more info about the starting point of this tweak
To Import
1. Download the file to your Desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
This indicator combo displays real-time Level II market data as well as up/down volume by tick for the current bar on the main chart panel. It works on any instrument, time-frame and chart type.
The Level II data is displayed to the right of the price bars as a horizontal histogram that extends out over the price bars. The histogram bars are color coded to visually identify the corresponding bid/ask levels. The price axis of the chart is used to show the price of each bid/ask level. In addition, the actual size of bids vs. asks at each level as well as a total bid/ask is printed down the right side of the histogram.
The second indicator included in this combo displays volume as a vertical progress-like bar to the right of the Level II histogram. This indicator displays the volume of the current bar. It shows, by tick, how much volume is occurring above, at and below the previous bar's closing price. It does this using three configurable color bars representing the relative proportion of the underlying volumes. The actual over/under volume count is displayed at the top and bottom of the bar.
These indicators only support live data and will not plot historical data.
Version 1.4 Changes:
1) Added current bar bid/ask volume option
2) Added level II bid/ask ratio
3) Added Strength indicator based on high/low/same volume and bid/ask ratio.
4) Added price line to make it easy to follow price movement through the histogram.
5) Other readability changes.
Version 1.5 Change:
1) All colors are now customizable.
Version 1.5.2 Changes:
1) Fixed property persistence issue.
2) Default histogram opacity set to 100
This file can be used if you are experiencing problems running the ADXMA with a value of 1. This was the version that first came out with Mike DoubleMA. Somehow in the following versions a gremlin crept in the would cause the ADXMA to flat line if you chose a value of 1.
This indicator use the KAMA (Kaufman's Adaptive Moving Average) for painting the bars in different colors, if the associated KAMA is rising, flat or falling.
Plots the dynamic support/resistance, based on the Hull Moving Average, and Higher High/Lower Low.
Description
This indicator plots dynamic support and resistance lines on the price panel.
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file
The ECO2New2 is a Momentum Oscillator that is not affected by opening gaps. See William Blau's Momentum/Direction/Divergence book.
Trading Ergodics with the Trend - Rules:
1. Enter or hold position only when slope of ECO2New2 Signal line has the same direction as the trend
2. Stand aside when slope of ECO2New2 Signal Line is in the opposite direction of trend
3. Enter or exit position when ECO2New2 and its Signal Line cross
4. Take note when the ECO2New2 is 'inside' it's signal line. This indicates failing momentum. This is what the magenta dot signifies.
July 12th, 2012 08:55 PM optionzen Can you please create this for NT7 and can you have an angle\slope parameter for this indicator, like the indicator has
October 20th, 2014 08:11 PM Zephyr THANK YOU VERY MUCH!
September 10th, 2013 08:48 PM Scott305
September 18th, 2010 08:23 PM marin I downloaded into Ninja 7 beta21 and the indicator plotted somewhat OK initially in the standard default settings mode..
.
The HATEMA and TEMA lines do not seem to plot. Fill OB/OS works OK.
Not sure if the 2nd and 3rd power regressions plotted correctly...setting the degree to 2, 3 & 4 produced similar lookin
g results.
May 27th, 2010 12:56 PM theLonelyTrader Used with volume analysis and price action, my favorite market indicator by far, especially on leading instruments like
6E, CL and DAX.
November 1st, 2009 02:19 PM cclsys Excellent. I suspect this will end up being one of the only 2-3 indicators I intend to have up on a chart during trading
. Is dynamic, visually simple, and technically sophisticated. Thanks.
I don't care about the colors or shape of the indicator or if it's above 80 or under 20
Only the UP and DOWN values
Stay long until there's value above Zero in DOWN
Stay short until there's value above Zero in UP
September 27th, 2010 01:11 PM fxprobie I have been using this on both 6.5 and NT7 and it works well on both. Only bug bear which is minor and of my own making
is that I sometimes like to have it updated live. ie not on bar close and this can give a couple of wiggley bits. Start
s one colour going down and then changes and goes up leaving spikes. Moral: wonderful indicator not to be used on live u
June 28th, 2020 08:53 PM naphtalicapital Thanks for posting. You did a great job. Unfortunately when i tries importing into NT8 it said the file is for an older
version. Do you have NT8 version?
May 25th, 2020 12:46 PM OutATime This is great, thanks for your efforts!
January 1st, 2018 05:47 AM Trini Thanks.
July 13th, 2017 01:51 PM delta9100
November 21st, 2016 11:23 AM tapit69 Super with other MA's Thanks
June 24th, 2015 05:50 AM sam8 Thanks I love it. It helped me out today already
May 28th, 2012 09:10 PM caryn23
August 8th, 2011 11:21 PM leon3456 Very usefull indicator, thanks for sharing
March 8th, 2011 08:21 PM jwhtrades I love this indicator. Would like more info on the color variants. I'm using with PPO and find it a great help. Is th
ere any additional info on it's derivation? Great job!
August 30th, 2010 05:21 AM Trendseek Works also with NT7
Nice Indicator - but the mathematics is a little bit tricky to understand!
November 22nd, 2011 06:54 PM caryn23 works great!!!
August 30th, 2010 11:28 AM aligator Thanks Sharky and Mike, cool indicator! What is the interpretation of the colors (Blue, light blue, red, pink, and speci
ally the white)? How one would trade this indicator?
October 1st, 2012 12:09 PM asteriskstar with float_with_price , it doesn't show up. it gives out msg" increase properties -right side margin. increase prop
erties from 4 to 30 , still doesn't work
November 26th, 2009 09:55 AM alright Hi jonesr9. I would love to use this indi, but when importing I get this message: Unable to import file 'TickCounter2.cs
'. Archive was not exported with ninjaTrader or its contents have ben manipulated.
Also if I extract the .cs file to the Indicator folder and try to compile it, I get the error message as in the pic here
The lines are in italian but I'm sure wou will understand.
Can you please help? Thank you
September 17th, 2009 09:07 PM jonesr9 My apologies for stating that I modified the code for this indicator to float tick count with price. I had actually use
d some of this code to modify an indicator which allows you to display price of the last closed candle. I got the two i
December 10th, 2010 05:46 PM GaryN69 Awesome, thank you!
December 1st, 2010 02:34 PM greathopes Sweet indicator ty ty thank you ;~)
March 10th, 2010 11:05 AM sedonafan I would also very much like to have audible alerts and paint the bars on this indicator.
September 23rd, 2009 01:50 AM HJay Love the arrow addition. 2 missing features that would be nice to have would be the ability to paint the bars according
to line color as well as audible alerting on change of color. Thanks
December 1st, 2010 02:24 PM greathopes Hey Cunparis you must be answering my prayers with this one problem is i'm getting an error saying: Property value i
s not valid. i get it when i input the time for the alert. with 24 hour time and with am/pm help cause i love the idea
. Kindly, Tangerine
September 21st, 2009 10:40 PM zwentz I can see if I can code this up to night, to automatically grab the news for each day.
September 13th, 2009 12:22 PM HJay Thanks Paris... Can't wait to see it fire off on Monday!
July 15th, 2010 01:29 PM sbgtrading The authors info is in the indicator code file itself, as a comment.
September 16th, 2009 06:45 AM HJay I recently added this to my range charts. I will let you know how it goes. From what I can see it does a pretty good j
ob at identifying R/S points. Thanks for the effort!
October 12th, 2010 01:32 AM dvan You can view detailed description of the indicator? )
June 22nd, 2010 04:04 PM willyad thanks
November 5th, 2009 10:23 PM cclsys This is an extraordinary indicator to be be able to access gratis. Anything that helps see the bids/offers or volume his
tory is helpful since really all you need to know about price is already on a bar chart. But volume isn't so obvious and
can be quite revealing. Amongst other things, very helpful when stop-trailing above break even to identify areas with m
uch higher support/resistance than others.
Only downside: it's another indicator, but this one has about 5,000 data points, so although very helpful, it's also a t
ad distracting!
September 26th, 2009 08:25 PM j0hnth0m I like what you did with my indicator. I get tonnes of comments on my blog for this indicator. I'll post a link to th
is version as you have greatly improved it.
Thanks.
September 22nd, 2009 11:29 PM Big Mike Nicely done, thank you!
September 29th, 2013 10:35 AM mdl060374 very nice!
July 7th, 2011 03:53 PM gg80108 imported into 7 works good
April 25th, 2011 01:29 PM wireford Mike-
Thanks for all your hard work. Downloaded this from NT a year ago but never realized you had programmed it until I joine
d BMT.
Andy Crawford
June 7th, 2010 06:53 AM enriquec Thanks man !!! Great job .I was looking for that . I have some ideas about the aplication of this stuff .Maybe we will
August 4th, 2015 01:30 PM essiar Good indicator but a bit buggy. Does not always sound the diamond alerts and I'm not sure why. Other than that, extremel
y useful.
August 3rd, 2015 01:18 PM zionj TNX, GREAT Indicator
July 5th, 2012 12:28 AM mmtrader4 This indicator is about as good as it gets. ADXVMA Alerts used along with anaSuperTrendU11 is as close to the grail as t
here is. So as to not clutter my chart, I use ADXVMA in a separate panel. It keeps me out of chop and warns of coming t
rend. If you'd like a screenshot or two let me know. (and I'll promise to pick a bad day to show how well it works even
on tough days)
a BIG THANKS!!
July 5th, 2012 12:26 AM mmtrader4 This indicator is about as good as it gets. ADXVMA Alerts used along with anaSuperTrendU11 is as close to the grail as t
here is. So as to not clutter my chart, I use ADXVMA in a separate panel. It keeps me out of chop and warns of coming t
rend. If you'd like a screenshot or two let me know. (and I'll promise to pick a bad day to show how well it works even
on tough days)
a BIG THANKS!!
May 26th, 2012 06:42 PM Fame787 Thanks for sharing. It's a good guide in day trading.
September 20th, 2010 04:52 AM Jason11 Why does this plot an extra tail on the indicator line when it changes direction (color)in NT7 ? It is not a clean line
April 5th, 2011 07:08 AM TimC UGH! Beware! I installed this indicator in NT7 and have yet to get my NT back to normal. Indicator screen takes FOREVER
to load, if at all. Many restarts. I've deleted all files for this indicator from NT but it seems the damage is done. Ma
y have to remove NT7 and start fresh.
March 20th, 2011 12:25 AM Aragorn I used it on Ninja 6.5 but when I switched to 7.0 I found that it tool an enormous amount of time to load a chart- sever
al minutes. I never suspected a ninjascript so I did everything- uninstalled and reinstalled Ninja; downloaded data from
Mirus; used very small charts to load; I even went so far as to question my Windows update so I restarted my computer f
rom a previous start point wiping out all new updates. Nothing helped. Slow Slow Slow. I contacted Ninja Support and I w
ent step by step reinstalling the application. As it turns out it was this ninjascript and I didn't even have it on any
of my charts or the chart I was loading. It was just in the list of indicators. I liked it when I had it on 6.5 but don'
t think I can use it on 7.0.
February 22nd, 2011 04:15 AM tmwff This indicator crashed my Ninja 7 system yesterday. I was told to delete it from the Ninja Support Team. They told me th
at yesterday a lot of useres had problems with this indicator. Be careful!!!
February 9th, 2011 02:58 AM leff Excellent
February 4th, 2011 03:36 AM gat3keeper Very Nice. Thank you!
June 30th, 2011 01:44 AM Southsea Thanks for the great indicator! I am having a problem, though. I can't get the price markers to work. I set price mar
kers on "true" and they do not appear. Thoughts? I would be REALLY helpful to have price markers. Thanks again for t
he fabulous indicator! SS
May 3rd, 2011 09:33 AM AttitudeTrader Thanks! Perfect for what I needed.
-AT
September 9th, 2010 02:38 PM theucreport
June 23rd, 2010 05:24 PM ValLiant exactly what i am looking for thanks for posting!
May 5th, 2010 07:03 AM mata Thanks for the helpful tool and it works with NT7
March 19th, 2014 06:33 PM bobc635 Thanks....Looks interesting
September 3rd, 2013 01:52 PM sdp0024 You can use www.Sharkindicator.com to easily create and backtest very quickly your strategies. It's pretty cheap to for
what it does. Think it's like $500 for the ultimate version. Well worth it in gold.
http://www.sharkindicators.com/products/bloodhound-utlimate/ I believe they are running a Labor Day special for $100 of
f through 9/4/2013
January 6th, 2011 11:54 PM masaleem1 Hi my name is saleem and I am a novice trader was taking a look at your volume plot
it looks very interesting so I just wonted to know why you came up with the this plot and
how the underling logic of the plot works. Well I am sure you are very busy and don't feel
you have to rush to reply back
well great work
April 15th, 2010 08:44 AM greathopes Very interesting looking. Can't wait to see it in realtime.
April 12th, 2018 02:17 AM traderhas My goodness!This is the ultimate filter for chop.Tried it on 1 min Dow futures.Thanks and God bless.CANNOT trade without
it.
August 13th, 2011 07:37 PM philtrader thanks for sharing. defining trend strengh is key with money management.
May 25th, 2011 10:49 PM piptek Thanks for sharing and your hard work. Big heart.
March 23rd, 2011 02:21 PM tradermav Thanks for sharing.
October 4th, 2010 02:23 AM tradermav Thanks for sharing appreciate the work put into this indicator.
January 29th, 2015 05:45 PM traderx4 Works in Ninja 7 too-Thanks
:-)
December 20th, 2009 02:34 AM cclsys Thanks. I am still hoping someone can find a way to plot the day PVP bar-by-bar. I think this would be extremely helpful
, not so much for live trading but for historical review of methods using current day PVP.
April 8th, 2010 04:18 PM anniebee321 i cannot see any data associated with this indicator?
January 10th, 2010 12:55 PM GoldStandard Thanks again for this tool. It's interesting to be able to view how the buyers/sellers order relationship changes at cer
tain points.
I ran across a site you might find interesting that is doing some work with order book analysis: tradingphysics.net. The
y have some interesting oscillators based on level 2 data & claim to have achieved quite a high success rate with them.
(i have no association with them)
I have a small request if its not too much trouble. For me it's a little bit counter-intuitive that the Total Buy line g
January 9th, 2010 09:18 PM GoldStandard Nice work and thank you! I'm trying this out now on replay mode.
January 7th, 2010 12:44 PM cclsys Thxs alot. I like indicators that give straight info that is otherwise hard to see (like Vwap and POC etc.). I also look
at the DOM alot and suspect this visual translation will prove helpful in learning to read various situations better.
February 24th, 2014 02:46 PM billymac48 Zones are colored grey on my chart.
you must make your chart background
something OTHER than grey to show up.
Cannot find an option to choose colors for zones.
April 15th, 2010 09:53 PM stockdisk Thanks was looking for this indicator.for those who don't see any thing on charts there are entries for zones like 1a &
1b enter starting pt say 1210 at 1a and ending of zone say 1212 at 1b.
January 29th, 2010 01:02 PM zacharydw00 I created & posted a selectable colored ind. called ConfluenceZones on NT's download forum. Written using NT 6.5, will p
robably work in NT 7.
January 12th, 2010 02:58 PM whoisthere48 This ColoredZones does not show up on any of my charts. I would like to use it if I could make it show up like in the e
xample.
January 11th, 2010 02:49 AM lolu This indy doesn't plot on my 5m chart. Can you provide/post a template ?
July 8th, 2017 01:22 PM Maxie A great indicator (still), I use it with 123-RossHook
May 4th, 2016 04:39 AM romus
May 11th, 2013 02:58 PM dnkhoward2 This thing is pretty amazing on practically all timeframes. Thanks
March 13th, 2013 01:33 PM nicosxm Could be interesting, but not sure of the exactitude for NT7 as I keep having to install and uninstall to re-install....
....possibly needs updating
March 17th, 2012 03:27 PM solondon very nice, applies to bigger time frames too as it uses fractal/swing high lows
May 30th, 2011 07:58 AM kman There seems to be a market profile/tpo program available for NT 7 but I cant find it.
Anyone know where it is?. The free one. Thanks!
February 19th, 2011 10:32 AM Ronin Downloaded this indicator to my NinjaT. 6.5 but it does not show in the 30 mins chart.Did it stoped working for some rea
son?
Please Advice.
December 9th, 2010 03:21 PM Rick Thanks !
October 28th, 2010 07:11 PM Default User
April 18th, 2010 10:15 AM RJay NT 7 version is now available at the thread link provided in description.
April 25th, 2016 06:20 PM 75martin Thank you for your work.
April 4th, 2015 01:22 PM ShaunG Looking for a Volume indicator which uses "Ticks" to measure volume. I am exited to give this indicator a try!
November 14th, 2011 11:36 AM peakskill Can you provide more information on how to read this indicator?
January 17th, 2011 03:35 PM traderhas thanks to all the great traders at mikes who give so much.
February 6th, 2010 02:03 PM wavey MPValues are always handy ref - works for 7 if you just move the TickSize part from Initialize to first OnBarUpdate bar.
Does anyone know what the diamonds are used for - reversal points / bollinger squeezing with keltner?
Thanks!
February 26th, 2011 03:05 PM Ducman Great indicator to avoid a lot of heat during trading. Thanks to you and all the others involved creating or updating th
e indicator.
November 3rd, 2010 10:35 AM BarOne How do you import the into Ninjatrader 7 or 6.5?
October 4th, 2010 07:59 AM senna12 Thanks for sharing this!
October 4th, 2010 02:00 AM tradermav Thanks for sharing. Excellent work.
August 13th, 2010 12:07 PM redpilot When for NT 7? I donīt know convert it to NT7
May 28th, 2010 06:07 AM Serninja Many thanks! Unfortunately not (yet) for NT7. Soon?
February 26th, 2010 07:34 PM PandaTrader You are right, sorry about that. I just saw you posted and uploaded it before him. Sorry, credits go to you then.
Thank you, Prtester
February 26th, 2010 05:25 PM Prtester Well that one look exactly as my code, even the shading area that roonious help me fix, :-( too bad .
December 1st, 2010 01:46 PM greathopes Hey just wanted to follow up on this one. I just love it. Thanks so much for putting it out for us.
October 27th, 2010 11:41 AM greathopes I was looking for an ask/bid ratio indicator and stumbled onto this. Very nice Thank You! Any chance we can get a litt
le ask/bid ratio ploted as a # on the price panel for tick charts like close to where the tick counter is? Thanks Again
November 14th, 2010 03:10 PM jabeztrading Ok. I posted the modifications. I hope it can help someone or even make it better.
November 12th, 2010 02:32 PM TraderAZ to jabeztrading...please feel free to post your 'mod'. Would really like to see you version...sounds interesting!!!!
November 11th, 2010 03:23 PM jabeztrading I like this indicator in that you can visually identify the RSI oversold/overbrought conditions on the price chart inste
ad of looking below. It does work in NT7. No need to convert, just import. I had modified it a bit to include another RS
I setting that is faster but only show extreme OS/OB levels based on sloping SMA. I'm willing to post it if that's ok.
Thanks again
jabeztrading
November 8th, 2010 12:00 PM TraderAZ sharmas,
My guess is it should easily convert to NT7. As for a 'track record'...this is NOT a trading system, but is best used w
ith a timing indicator on whatever time frame you are trading.
Hope this helps.
Happy Trading,
November 7th, 2010 10:17 PM sharmas Hi
Thank you for this indicator.Can this be converted to NT7 and what has been the track record/rating for this so far
November 26th, 2010 11:56 PM fasttraxs Great indicator I been useing it on a 40 setting for my 4 range scalp trading for trend instead of one 40 line MA that I
January 19th, 2011 08:11 AM peakskill I find this indicator, along with the original indicator, to be a helpful confirming indicator. I like to plot it on a
shorter timeframe chart (range chart) from my entry signal chart (3 minute for GBPUSD). It alerts me to trouble at my e
ntry area and also helps give confidence while using a trailing stop. Thank you for the indicator.
January 19th, 2011 08:14 AM peakskill Very helpful. Thanks!
December 1st, 2010 01:30 PM greathopes Looks fantastic I cant wait to check it out. Nice pullback entry visual. Thanks man!
November 16th, 2010 01:52 PM jabeztrading Looking good TraderAZ. I think you've started something here. Maybe others will come with other ideas and expand on this
February 8th, 2011 08:20 PM allofpm what is this chanel indicator youhave on your chart?
December 30th, 2010 06:41 PM Southsea Thanks for the indicator, but I can't download it because it's a cs file. Can you provide it in a zip format? Thanks s
o much!
December 11th, 2010 03:25 PM greathopes Wow I love this indicator sorry but I cant get it to run on Ninja 7.0. It loads but I can't find it in th
e indicator list. It says to close and reopen ninja to get it but to no avail...